Camry RR... [Archive] - Toyota Forums

Rolla Pat

05-31-2002, 01:29 PM

Hey Ben!

How are ya? I'm doing good. Finishing up on my new AE86. Just installed some 82 Supra rims with Yokohama A520 rubber and a N1 style cat back fitted under the axle. I have some pics posted in the Corolla section. I'm very curious about your GS300 project and since I live about 10 minutes away from your house, I'd like to see it. I'd also love to see your parents IS300. I have a digicam so I could take some pics. Do you have any pics?? With such a project I'd figure we deserve at least a few?? I was looking at your current setup for the GS300 and for a guy who lost his job not too long ago, seems you put over 80,000$ in that thing, even at cost price! Not that I doubt you but it seems like an "out of this world" project. I'm free weekdays after supper so I'd love to see it! Even if it's a friends shop, we could always drive down there. You should present your project on my club, Toyotec. There's a bunch of people from our area on my club who would sure like to drive the small mileage to see it. Can you also give the number for Speedcore, the place where you got your parts? They seem to have a huge selection and i'd be interested in some HKS equipment.

Let me know!

_________________
Rolla Pat
Toyota 4ag addict
TOYOTEC - Canadian Toyota Club (http://www.toyotec.a1v.com)

[ This Message was edited by: Rolla Pat on 2002-05-31 13:33 ]

Jzs147-RR

05-31-2002, 08:56 PM

On 2002-05-31 13:29, Rolla Pat wrote:
Hey Ben!

How are ya? I'm doing good. Finishing up on my new AE86. Just installed some 82 Supra rims with Yokohama A520 rubber and a N1 style cat back fitted under the axle. I have some pics posted in the Corolla section. I'm very curious about your GS300 project and since I live about 10 minutes away from your house, I'd like to see it. I'd also love to see your parents IS300. I have a digicam so I could take some pics. Do you have any pics?? With such a project I'd figure we deserve at least a few?? I was looking at your current setup for the GS300 and for a guy who lost his job not too long ago, seems you put over 80,000$ in that thing, even at cost price! Not that I doubt you but it seems like an "out of this world" project. I'm free weekdays after supper so I'd love to see it! Even if it's a friends shop, we could always drive down there. You should present your project on my club, Toyotec. There's a bunch of people from our area on my club who would sure like to drive the small mileage to see it. Can you also give the number for Speedcore, the place where you got your parts? They seem to have a huge selection and i'd be interested in some HKS equipment.

Let me know!

_________________
Rolla Pat
Toyota 4ag addict
TOYOTEC - Canadian Toyota Club (http://www.toyotec.a1v.com)

[ This Message was edited by: Rolla Pat on 2002-05-31 13:33 ]

Hi Man long time no see,I would realy love to show you the car I need to take some pics people are realy freaking out.So far I have dumped 30 000$ into the car since I got some parts for free and most of the rest at cost.Right now im working night shift so I sleep all day long and usualy my weekdays pass too fast.When I have time off im usualy working on my friends servers near Laval.Right now the car is located in a garage in Pointe-Calumet .If you want we could meet if I can plan it ahead and im not working like a pig to pay this stuff off.BTW you know anybody who would want some parts for a 2jzgte I will have alot for sale soon since I got to find a way to pay some bills off.(BOV's , stock turbos,etc..)
Speecore is going to have a site up soon but for now the domain speedcore.com is used so they got to wait before opening up there online store .The main shop is in Japan so if you want the telephone number I can give it to you before he moves his shop down here next year.I usualy dont call him at work but just ask for Mike he speaks ok english.Email me at camryxlev6@hotmail.com will set something up soon because I got to realy show my project off before its done.BTW if you know somebody who could help me out with installing a getrag I would be more then happy since that part of this project has been hell.Im way over my original budget (7000$) and I have Canada customs on my ass for parts I receive that they charged me mad tax on.lets just say that my project is on hold or for sale unless I can come up with extra money soon.

_________________
1995 Veilside Aristo twin turbo
(BPU+++ installed)400+ WHP
Pictures to come ..
-------------------------------------------
1997 Camry XLE V6 (sold most parts)
http://www.my-camry.cityslide.
Site will be updated

[ This Message was edited by: CamryRR on 2002-05-31 20:57 ]


Toyota Forums :: Toyota Nation > Toyota Division Forums > Lexus Forum > General Lexus Discussion > Camry RR... PDA Camry RR... Rolla Pat 05-31-2002, 01:29 PM Hey Ben! How are ya? I'm doing good. Finishing up on my new AE86. Just installed some 82 Supra rims with Yokohama A520 rubber and a N1 style cat back fitted under the axle. I have some pics posted in the Corolla section. I'm very curious about your GS300 project and since I live about 10 minutes away from your house, I'd like to see it. I'd also love to see your parents IS300. I have a digicam so I could take some pics. Do you have any pics?? With such a project I'd figure we deserve at least a few?? I was looking at your current setup for the GS300 and for a guy who lost his job not too long ago, seems you put over 80,000$ in that thing, even at cost price! Not that I doubt you but it seems like an "out of this world" project. I'm free weekdays after supper so I'd love to see it! Even if it's a friends shop, we could always drive down there. You should present your project on my club, Toyotec. There's a bunch of people from our area on my club who would sure like to drive the small mileage to see it. Can you also give the number for Speedcore, the place where you got your parts? They seem to have a huge selection and i'd be interested in some HKS equipment. Let me know! _________________ Rolla Pat Toyota 4ag addict TOYOTEC - Canadian Toyota Club (http://www.toyotec.a1v.com) <font size=-1>[ This Message was edited by: Rolla Pat on 2002-05-31 13:33 ]</font> Jzs147-RR 05-31-2002, 08:56 PM On 2002-05-31 13:29, Rolla Pat wrote: Hey Ben! How are ya? I'm doing good. Finishing up on my new AE86. Just installed some 82 Supra rims with Yokohama A520 rubber and a N1 style cat back fitted under the axle. I have some pics posted in the Corolla section. I'm very curious about your GS300 project and since I live about 10 minutes away from your house, I'd like to see it. I'd also love to see your parents IS300. I have a digicam so I could take some pics. Do you have any pics?? With such a project I'd figure we deserve at least a few?? I was looking at your current setup for the GS300 and for a guy who lost his job not too long ago, seems you put over 80,000$ in that thing, even at cost price! Not that I doubt you but it seems like an "out of this world" project. I'm free weekdays after supper so I'd love to see it! Even if it's a friends shop, we could always drive down there. You should present your project on my club, Toyotec. There's a bunch of people from our area on my club who would sure like to drive the small mileage to see it. Can you also give the number for Speedcore, the place where you got your parts? They seem to have a huge selection and i'd be interested in some HKS equipment. Let me know! _________________ Rolla Pat Toyota 4ag addict TOYOTEC - Canadian Toyota Club (http://www.toyotec.a1v.com) <font size=-1>[ This Message was edited by: Rolla Pat on 2002-05-31 13:33 ]</font> Hi Man long time no see,I would realy love to show you the car I need to take some pics people are realy freaking out.So far I have dumped 30 000$ into the car since I got some parts for free and most of the rest at cost.Right now im working night shift so I sleep all day long and usualy my weekdays pass too fast.When I have time off im usualy working on my friends servers near Laval.Right now the car is located in a garage in Pointe-Calumet .If you want we could meet if I can plan it ahead and im not working like a pig to pay this stuff off.BTW you know anybody who would want some parts for a 2jzgte I will have alot for sale soon since I got to find a way to pay some bills off.(BOV's , stock turbos,etc..) Speecore is going to have a site up soon but for now the domain speedcore.com is used so they got to wait before opening up there online store .The main shop is in Japan so if you want the telephone number I can give it to you before he moves his shop down here next year.I usualy dont call him at work but just ask for Mike he speaks ok english.Email me at camryxlev6@hotmail.com will set something up soon because I got to realy show my project off before its done.BTW if you know somebody who could help me out with installing a getrag I would be more then happy since that part of this project has been hell.Im way over my original budget (7000$) and I have Canada customs on my ass for parts I receive that they charged me mad tax on.lets just say that my project is on hold or for sale unless I can come up with extra money soon. _________________ 1995 Veilside Aristo twin turbo (BPU+++ installed)400+ WHP Pictures to come .. ------------------------------------------- 1997 Camry XLE V6 (sold most parts) http://www.my-camry.cityslide. Site will be updated <font size=-1>[ This Message was edited by: CamryRR on 2002-05-31 20:57 ]</font>