FOG LAMPS ON xB

IS THE WIREING ALLREADY IN THE CAR OR IS IT ADDED WITH THE LAMP KIT??? SCIONTIFIC

I'll ask one of the tech's at work tommorrow if nobody replies that knows. BTW please turn off the cap locks. 4 out of your 5 posts have the caps lock on. :rolleyes:

sorry about caps... i didnt know????
will check back tomorrow....... Terry

Didn't have a chance yesterday. I'll ask today.:p:

Yes the wireing is already in the vehicle. The knock-outs where the fog lights go will just push out from behind, after doing that you will find a 2-pin connector tape to the vehicle wireing harness inside the bumper skin.

The foglight kits are easy to install, if you have normal hand tools and average mechanical ability you could probably do it yourself. If you buy the factory kit it should have the installation instructions with it.

thanks TT01...... I answered my own ? today with a little research under the hood.... I found the 2 connections by knockouts.....
I have to assume that the kit would come with a new headlight switch to replace orig.... that has a position for fog lamps....
and would switch them off when high beams are on....
thanks for your help..... Noob .... Terry

My guy pretty much said the same thing. He said it was easy.

Thanks trdcamry...... i'll follow up when I get the kit

sciontific

Looks like I am going to have to go get me a foglight kit too. The front end mask I prdered came with holes over the foglamp knockouts. Looks aweful with paint visible through two rectangular cut outs.

The bra is nice though. Black carbon fiber matches the interior trim.

Once again T_T 01, glad you are on the forum.

Its np at all. I have never before really paid much attention to any kind of forum, but I enjoy it

Hello, Toyota Tech 01.... good information, a couple of things. I'm planing to buy a Colgan Bra but they said they only have 2004 and I have 2005, will they fit? Also looking to do +2 rims, will the 215/45-17 fit. 205/45-17 are expensive and not much selection on all season tires.... thanks Scionato..