Re: Paint chipping on 2005 Tacoma

NeoCenturian wrote:
> I picked up my 2005 Tundra double-cab in March of last year and have also
> noticed paint chips appearing in various spots. Instead of along the bottom
> edges or in the front, mine seem to be on the top surfaces of the hood and
> window areas.
>
> Also - I noticed that the surface is easily scratched (especially along the
> sides).
>
> Has anybody else experienced this? If so, what action did they take? I
> purchased a small bottle of touch-up paint that I've been using just to
> prevent the onset of rust, but I'd like to know of a more permanent solution
> or preventative action.
>
> "Toytruck" <t.greenfield@verizon.net> wrote in message
> news:1108141830.692874.208980@c13g2000cwb.googlegr oups.com...
>
>>Here's some pictures
>>http://mysite.verizon.net/res0qmii/2005tacoma/
>>
>
>
>
Yeah I have the same problem 2004 Tundra double cab, the fender flares
and the rear sides are all chipping quite badly. I think it is this new
enviro-friendly paint.
My Dealer said that there was nothing they could do. Saddly running
boards are not an option for all of us...

Check out http://www.tundrasolutions.com big discussion over there about
this exact issue. Due to EPA regulations and the inability of automakers to
use leaded paint, paint that meets EPA standards is therefore a little
softer than older generation paint. Toyota aparently recomends purchasing
running boards to protect the paint. See the web site for more information
..

In article <FuRUd.8095$OU1.541@newssvr21.news.prodigy.com>,
anonymous@somewhere.com wrote:

> Check out http://www.tundrasolutions.com big discussion over there about
> this exact issue. Due to EPA regulations and the inability of automakers to
> use leaded paint, paint that meets EPA standards is therefore a little
> softer than older generation paint. Toyota aparently recomends purchasing
> running boards to protect the paint. See the web site for more information
> .

I wonder if a couple of clear coats would help? Just suggesting/asking.

In article <FuRUd.8095$OU1.541@newssvr21.news.prodigy.com>,
anonymous@somewhere.com wrote:

> Check out http://www.tundrasolutions.com big discussion over there about
> this exact issue. Due to EPA regulations and the inability of automakers to
> use leaded paint, paint that meets EPA standards is therefore a little
> softer than older generation paint. Toyota aparently recomends purchasing
> running boards to protect the paint. See the web site for more information
> .

Pls excuse me for jumping in on your return post. When I lived in a
steady place I knew many toy wrenches and body/paint folk. The
body/paint guys told me that the first and second years of any new color
all ways sucked. I no longer live there and don't know how to reach
those guys. As a suggestion/question, would a really good clear coat
help? It is not possible to get one at the dealer--They want money too
much. Many local body shops are similar. The only viable solution I can
see is to go to the local hotrod meetings. Keep in conversation that we
love all cars, stand on toy being the most reliable vehicle made. Old
school guys don't like that, but the honest and fair ones will
acknowledge that.

I hope I've been useful