PDA

brake override

bt6
10-18-2002, 06:59 PM
does anyone know how to override the brake security on a pioneer indash dvd player

thanks,
brian
wunderboy
10-18-2002, 07:09 PM
Why would you want to watch a movie while you drive anyway. Thats fckn-nuts!
project trueno
10-19-2002, 08:15 PM
...not as nuts as a PS2 :lol: :lol:
playing GT and driving at the same time
smokey8890
10-21-2002, 09:19 PM
i actually got someone to install my AXV-P7300DVD in for me. theres like a crapload of wires there so i don't even know wheres to start. if you can tell me what wire i should look at i might be able to help you out.
bt6
10-21-2002, 09:33 PM
its the two light green wires coming from the brain and the h.u.
BigBodyLexus
03-21-2009, 10:32 PM
buy a toggle switch and hook up the wire that goes to the parking brake and and a ground wire to the toggle switch and enjoy
MHSD
03-22-2009, 05:28 PM
www.avic411.com do some searching they should have the info there. Some are easier than others.
Pandamanda
04-07-2009, 02:12 PM
In your instruction or owner's manual it should tell you which wire is the parking sensor wire or brake wire. Just ground that wire to some metal on the chassis.
MHSD
04-07-2009, 06:52 PM
In your instruction or owner's manual it should tell you which wire is the parking sensor wire or brake wire. Just ground that wire to some metal on the chassis.


Pioneer did not make it this easy.... you will need to do this as well, but there is a specific wire from one pin location to another. the website listed above is a forum that will have info on it.
Pandamanda
04-07-2009, 08:31 PM
lol Well I'm glad I got a Kenwood unit then! Good luck!