Quote:
Originally Posted by WATacoRider
Just double check. You were right.
Without remote start:
My car does NOT lock, if I put on my seatbelt before inserting key.
|
OK Wataco.. here's the deal, if you perform RS, then get in the vehicle, in order for the car to lock automatically with the key in the ignition you have to do it in the following order:
1. get in vehicle, which should be running after RS.
2. CLOSE THE DOOR < IMp!!
3. place key in ignition and turn to ON
4. within 3 seconds of #3 above press the brake pedal to disengage RS.
the doors should lock automatically if the lock priority has been setup in the alarm. Sorry for the delay in responding to this, but it took me all this time to figure it out. Thank you.
__________________
Go faster...
ALL INFORMATION I PROVIDE IS FOR REFERENCE ONLY AND IN NO WAY REPRESENT MY OWN THOUGHTS, AS I HEAR VOICES, THEREFORE WHATEVER YOU DO WITH THIS INFORMATION IS AT YOUR OWN RISK.
Linear Mode
