HOW TO TRUCK: How to Load an ATV into a Truck - Toyota Nation Forum : Toyota Car and Truck Forums
 
LinkBack Thread Tools Display Modes
post #1 of 1 Old 12-03-2015, 09:06 AM Thread Starter
Sponsored Editorial Content
 
Join Date: Jul 2010
Posts: 1,609
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Thanks: 0
Thanked 29 Times in 24 Posts
iTrader Score: 0 reviews
(Thread Starter)
HOW TO TRUCK: How to Load an ATV into a Truck


Quote:
A lot of fun can happen on an ATV, but you’ve got to get your toy to the trails first. In the latest installment of our How to Truck series, we’ll walk you through the steps required to safety load an ATV into the back of your pickup truck.

Step 1: Get Proper Ramps


There are tons of different kinds of ramps out there, just make sure you use something that is built by a reputable company and is rated to take the amount of weight you’re applying. Once you line up the ATV with the truck, place those ramps in the center of the wheels.

Step 2: Secure the Ramps to Your Truck


It’s here that you’ll want to secure your ramps to the truck to prevent them from falling out from under you. Ratchet straps work best for this, though any type of tie-down strap will do. It is best to attach your straps onto your ramps so that they do not get in the way during the loading process. So hook one end of the strap onto the ramps on the other end onto the safety chain tie-down ring beside the hitch receiver.

This will keep the strap out of the way and it was also put downward pressure on the ramps, holding them firmly onto the tailgate and truck.

Step 3: Wear an Approved Helmet


Always remember, safety first.

Step 4: Shift Into 4LO


Putting your ATV into 4LO will help you get up the ramps nice and slow with no drama or hassle.

Step 5: Slowly But Firmly Head Up the Ramps


Give the ATV some gas and get up those ramps. You don’t need to be a speed demon, but you also must stay on the gas and not back off in the middle of the loading. Be firm with the throttle.

Step 6: Creep Forward


Once your rear wheels are fully onto the tailgate, slowly creep forward until you are nearly touching the front of the bed. Now, shut off your ATV and make sure you put it in park if you have it, and/or apply the the parking brake. Make sure you pull the key out of your machine.

Step 7: Remove Ramps and Close Tailgate If Possible


You’ll want to close the tailgate if it’s possible. Even if it does close, you still need to properly tie-down your ATV.

Step 8: Secure Your ATV


To properly tie down your ATV, you want to attach your straps to points that will compress the suspension. On an ATV, the best place is usually onto the cargo racks. If you use strong ratchet straps, they will compress the suspension of the ATV for you as you crank them down. If you don’t own ratchet straps, pull down on the end of the ATV you’re tying down to compress the suspension, then tighten your straps. If you have a friend, get them to sit on the very front or back edge of the machine while your secure the straps.

With the suspension compressed, it will put constant pressure on the strap, helping to control side-to-side swaying motion.

And that’s how you load an ATV into a pickup truck.

Read more about HOW TO TRUCK: How to Load an ATV into a Truck at AutoGuide.com.
AutoGuide.com is offline  
Sponsored Links
Advertisement
 
Reply

  Toyota Nation Forum : Toyota Car and Truck Forums > Toyota Nation Forums > Toyota News & Site News

Bookmarks

User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome