Toyota Nation Forum banner

Search results

1-20 of 25 Results
Advanced Search
  1. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    5mm will clear fine and not cause any issues Sent from my SM-N960U using Tapatalk
  2. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    Top pic are Enkei rpf1 (19x8.5 +42 with a 15mm adapter making the offset +27) with a 245/40/19 tire all around in silver, bottom pic are work xd9 in bronze (18x9 +38 235/40/18 tire all around) Sent from my SM-N960U using Tapatalk
  3. Offset: what's your experience?

    Camry 7th Generation (2012-2017)
    From my experience, I actually had to raise my car some from going from 18 to 19 inch wheels and taller tires. If I went with a 235/40 tire I would've had less issues. I wanted a more meaty tire flush look and much preferred the look of a 245/40 tire. I didn't roll or pull my fenders...
  4. Offset: what's your experience?

    Camry 7th Generation (2012-2017)
    The lighter wheels made a good difference, mainly in the handling dept. I'm sure this is also attributed from the wider tires as well. With the lighter wheel/tire setup, steering wheel felt lighter, braking was improved a bit, and overall feel of my suspension was better. The 19" RPF1 were...
  5. Offset: what's your experience?

    Camry 7th Generation (2012-2017)
    I'm on some enkei rpf1's, 19x8.5 +42 with 15mm adaptors bringing my offset to a +27. Running 245/40's all around. My handling with my setup is much better than factory, braking is similar to stock from what I can tell and I've driven my car hard on canyon drives. I have rolled and pulled my...
  6. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    Awesome cars man, Honda’s are definitely fun cars to mod, especially since it’s cheap compared to my corvette. I own an Eastwood fender roller, so getting my wheels to fit the way I want them to is no problem for me. No engine mods planned for my Camry, I just want to add a newer navigation...
  7. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    From my experience, yes, had to do a light roll out back, didn’t need to alter the front fenders at all. Although like you I’ve modified my fenders to fit my new wheels better, I personally rolled and pulled my fenders to fit my wheels. My car is lowered on full coilovers (Tein street advance Z)...
  8. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    Your link doesn’t show the offset of the wheels. General search online pointed to a +40 offset, which in my opinion isn’t aggressive by any means, it’s slightly going to get pushed out to the fender and inside towards the suspension slightly. Also don’t know what current wheels you currently...
  9. Adding backup camera to a 2014 SE

    Camry 7th Generation (2012-2017)
    I honestly don’t know, I suggest researching. Also for the YouTube link I used for my install: Sent from my iPhone using Tapatalk
  10. Adding backup camera to a 2014 SE

    Camry 7th Generation (2012-2017)
    Everything was included with the kit and it was a simple plug and play (factory plug is under center console below the cup holders) other than removing a panel from the trunk, drilling a hole for the camera, installing camera, routing wires. I got this kit, even provides YouTube links, been...
  11. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    Honestly I don’t know haha. I picked them up from someone local, that also had them on a 2013 Camry. Offerings straight from their catalog. Sent from my iPhone using Tapatalk
  12. Adding backup camera to a 2014 SE

    Camry 7th Generation (2012-2017)
    I did this on my 2013, was a simple plug and play. I got it installed in 30 minutes, that includes routing everything to the factory plug. I bought my rear camera from amazon. YouTube link below for a 2014 install: Sent from my iPhone using Tapatalk
  13. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    I’m on Tein Street Advance Z coilovers with progress rear 19mm sway bar (installed May 18’), about a finger gap all around on 245/40 tires. I do have a roll and a slight pull on all four corners. Wheels are Enkei RPF1 19x8.5 +42. No issues other than my rubbing at the rear when I was running...
  14. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    Changed my spacers to 15mm and the car no longer rubs, effectively making my wheel specs 19x8.5 +27. Sent from my iPhone using Tapatalk
  15. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    Changed wheel setups twice within the past month. Took off my 18x9 +38 work xd9 (are now for sale) and picked up a set of 18x9.5 +27 (2) and 18x9.5 +40 (2) enkei nt03 with 255/40 all around. I’m sure you’re all wondering why the different specs... Bought them with the seller believing they...
  16. What did you do to your Gen 7 Camry today?

    Camry 7th Generation (2012-2017)
    Installed a progress 19mm rear sway bar, the difference is worth it. Sent from my iPhone using Tapatalk
  17. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    You will probably rub slightly in the rear when you hit a hard bump/dip. Someone posted previously (post #1003) that they did running the same spec wheels with some 245/35/19 tires. Sent from my iPhone using Tapatalk
  18. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    I would get what you think looks best personally. Black tends to match with almost anything, so you can’t really go wrong with whatever you choose. Personally, I like the contrast of another color with a black car opposed to an all black car. I personally have bronze work emotion xd9, my car is...
  19. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    Only pic I have which is on the rear. You can see my tire marking where it was rubbing the rear lol. Sent from my iPhone using Tapatalk
  20. The ultimate wheel thread! size/offset and misc

    Camry 7th Generation (2012-2017)
    I have rolled fenders and I don’t rub with my 18’s and passengers. I’m lowered about 3” on Tein coilovers. Running a square setup of 18x9 +38 with 235/40 A simple flat roll was all I needed fortunately, no flare done to the fenders. Before rolling, I’d rub on the rear, the fronts never...
1-20 of 25 Results
Top