Toyota Nation Forum banner

Search results

1-20 of 59 Results
Advanced Search
  1. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    sorry not sure I know what you mean in your post please elaborate thanks on the mods, please sticky part
  2. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    Well thanks for the compliment I will be trying to get to those as soon as possible and wil post the pics
  3. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    Ok I am going to attempt the steering wheel controls as well as the door switch where the window button is I am just running a little bit short on time however I know the window switch is the same 3mm Led as the A/C, Deforst, and Recirc Button so you would need at least 4 of those and I would...
  4. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    Thats a negative I have purchased all my LED products from Onzium.com and I have not posted any links to Ebay that must have been someone else here is the link to where I got my strios they are 9.5 inches long and fit mint no alteration needed http://www.oznium.com/led-flex-strips feel free to...
  5. Replaced LED's in the Instrument Panel(PICS!!!)

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    here is my attempt at a DIY for hvac led replacement http://www.toyotanation.com/forum/showthread.php?t=319869
  6. Replaced LED's in the Instrument Panel(PICS!!!)

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    only the bulbs for the illumination of the hvac moduel have condoms on them all the rest are leds and they do not have condoms at all
  7. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    now for the airbag lights and the seat belt light for the passanger seat if you have done the Cluster already it is the same exact thing just swap out the LEDs with the PLCC-2 surfacemount LEDs and you are good to go
  8. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    next seperate the blower motor switch just like you did the other two the button comes off the same way the only reason i am posting this one seperat is becaust the internals are different
  9. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    when the switch is fully apart you will see a white gear with a notch in it please make sure you pay attention to where this notch is it must line up correctly or you can damage your component it is lined up with a little nipple on the inside of the switch itelf on mine
  10. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    ok now for the switch dissassembly flip the switch over and just like when you removed the switches from the face plate pry the white housing out to release the black clips and gently and slowly lift the inside of the switch up and out of its housing
  11. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    after that you should have all three switches out and on your work station
  12. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    Now on the back of the head unit there are little white tabs that lock the switches into the faceplate gently pry the black housing back to release the clips it is the same on all 3 switches
  13. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    when they are out they look like this make note that if you want white lights for your controls just remove the yellow condom
  14. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    you can now remove the HVAC head unit from the vehicle flip the head unit over and you can see where the bulbs are that need to be replaced these are bulbs with bulb condoms on them and not leds you can get them out with a small flat blade screwdriver simply twist and out they come
  15. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    next grab the hvac Panel and pull it twords you to and you can gain access to the back of the unit to dissconnect the components before removing the connectors i made sure all the knobs were turned far left for less confusion of switch position there are little tabs located on the side of the...
  16. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    next remove the storage compartment and dissconnect the 12 V accessory port folowed by the panel for the airbag lights as well as the security light and remove electrical connectors
  17. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    now I do not have pics of this step but i had to remove the panel that houses the vents and 4 way hazard switch as well as the besel from around my radio I am not sure if this has to happen with the stock radio
  18. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    then you want to remove the side mouldings that are up by the radio
  19. DIY Hvac LED swap

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    First thing to do is to remove shit knob and the plastic trim moulding from the sides of the center console
  20. Need Help Wiring LED Strip!!!!

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    yes you can if that suits your style it is compleatly fine to do that I used a powered relay so they come on and shut off with the ignition key but they are not linked to the directionals
1-20 of 59 Results
Top