Toyota Nation Forum banner

Search results

1-20 of 162 Results
Advanced Search
  1. axle removal give up

    Pre-88 Toyota Pickup/Hilux
    thanks FOURWD1, I have the rear end sitting on a pair of jack stands..took about 30 minutes to get everything loose. yea its the same set up, a guy at work said I needed to put the brake drum on backwards, install the lug nuts and give a couple good pulls (use it like a sliding weight) and the...
  2. axle removal give up

    Corona Forum
    ok, heres me...03 Tacoma and 73 corona..worked on both engines and trannys and various other stuff but have never worked on the rearend on either..just rebuilt my rearend in my elcamino...easy... but never on the Toyotas...GM: remove rear facing cover..take out C-clips..remove axles...Toyota...
  3. axle removal give up

    Pre-88 Toyota Pickup/Hilux
    ok, heres me...03 Tacoma and 73 corona..worked on both engines and trannys and various other stuff but have never worked on the rearend on either..just rebuilt my rearend in my elcamino...easy... but never on the Toyotas...GM: remove rear facing cover..take out C-clips..remove axles...Toyota...
  4. A.r.a air conditioning unit

    Pre-88 Toyota Pickup/Hilux
    yes, sorry i know its the wrong forum, toyotanation is set up to ask specific questions about specific models in their section..which is great..perfect web site setup...but this a/c unit could have been possibly used on other toy makes..thats why i was putting it here in hopes some one could...
  5. A.r.a. Air conditioning unit

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    Hi all, Would like to try in this Corolla thread too. Anyone know of this brand? Just started to see if I can get it working again. When I got the car some bonehead looks like, cut the A/C hoses (lo\hi side) off at the firewall and took the I believe sanyo compressor and the mounting bracket...
  6. A.r.a air conditioning unit

    Pre-88 Toyota Pickup/Hilux
    Hi all, Would like to try in this hilux thread too. Anyone know of this brand? Just started to see if I can get it working again. When I got the car some bonehead looks like, cut the A/C hoses (lo\hi side) off at the firewall and took the I believe sanyo compressor and the mounting bracket. Was...
  7. A.R.A air condtioning unit

    Corona Forum
    Hi all, anyone know of this brand? Just started to see if I can get it working again. When I got the car some bonehead looks like, cut the A/C hoses (lo\hi side) off at the firewall and took the I believe sanyo compressor and the mounting bracket. Was this A.R.A a/c unit standard or aftermarket...
  8. Premature water pump failer?

    Tacoma 1st Generation (1995.5–2004)
    well,i,ve got the fan pully bracket off,and it doesnt seem to be leaking out of the hole..a closer look and it seems to be leaking under the thermstat area..looks like a leak in the pump gasket,napa has the limited lifetime,bring back the old pump exchange for new one. i'll go ahead and take it...
  9. Premature water pump failer?

    Tacoma 1st Generation (1995.5–2004)
    hi all.. my water pump is leaking and mad/pi#$%^ that I have to change it. I bought the truck at 103,000 5 yrs ago and replaced the Asian OEM pump with a Napa true flow. Now at 160,700 its leaking. Of course Toyota OEM parts are most always the best, I try to replace key component parts with...
  10. Lifting Question

    Tacoma 1st Generation (1995.5–2004)
    Hi all, Looking to do a 3" lift on my 2003 prerunner 4 dr 2WD. I checked Toytec out beause I always heard good things about them and their quality lifts. I saw their Ultimate Tacoma lift w/bilstein shocks P/N ULTAC-955 for $1000 plus $300 for shipping to Hawaii..checked earlier in the week and...
  11. changed to LED bulbs for Dome and Map

    Tacoma 1st Generation (1995.5–2004)
    ok, ok, I had to re-read what I wrote to see if I was a tard...lets try it like this. ... with the original incandescent bulbs in they work with the key in the ignition"ACC"/ "ON" ,,,they work without the key in the ignition..Dome light switch is in the "on" position the light lights,,,switch...
  12. changed to LED bulbs for Dome and Map

    Tacoma 1st Generation (1995.5–2004)
    Oh, they all work, its just I have to have the key in the ignition and it be in the "ON" or engine running position. Its when i take out the key that the lights dont come on when i open the door or slide the light switch to "ON" or push the map light switch.
  13. changed to LED bulbs for Dome and Map

    Tacoma 1st Generation (1995.5–2004)
    I saw some old posts' on these (2008) but nothing current. Got some LED lights for the dome and map lights. Anybody figure out how to operate these without the key in the igition and ON? Is there stiil the need for an inline relay or something? 03' 4dr Thanks
  14. Help in choosing a carburator

    Corona Forum
    Verlaryder..i saw your post yesterday...actually i got the 32/36 weber and it still dieseled..looking into the bowl i noticed the fuel bubbleing and wondered WTH...i did replace the thermostat while i was doing a semi-rebuild on the engine i told NAPA what i had and they gave me the "correct"...
  15. Adaptive One brake pads??

    Tacoma 1st Generation (1995.5–2004)
    Yep.. i do have some brake dust residue..but the brakes do perform better and before when i would back up into the drive way when stopping i would hear this click noise stepping on the brake(but no more),it might have done it moving forward but i didnt hear it then,,probably didn't hear it cause...
  16. Adaptive One brake pads??

    Tacoma 1st Generation (1995.5–2004)
    Can't tell that much,the truck is dirty but i ran my finger across the rim and had a little brownish-black grime. I'll give it a cleaning this weekend and then give it a few days and I'll get back to you...I've got black steelies on it so...it'll be a little harder to tell.
  17. Adaptive One brake pads??

    Tacoma 1st Generation (1995.5–2004)
    Went and got the Adaptive One pads about 2 weeks ago from napa but they're only 90 day warranty..all the pads at napa are only (max) up to 90 days warranty. The guy said the "lifetime warranty went out the door years ago"..:(...but the pads are doing good..quiet,stopping is better,a who lot...
  18. 32/36 dgev weber for 18rc adjustment q.

    Corona Forum
    Yea,I got this from Import Warehouse Dist.(Allsource) (redline distributor)on ebay out of Yakima,Wash. Two days ago I called them up and talked to Jim. I told him the problem and he was very knowledgeable and asked me alot of questions. He was familar with all the symtoms i had, the 1 problem he...
  19. 32/36 dgev adjustment q. On 18rc

    Corona Forum
    Wondering if anyone can help out on my corona here. I finally got the new weber (K744) installed but having some adjusting problems 1) idles a little ruff 2)boggs down when accelrating * had a hard time in the initial settings of trying to get it to idle This is what I did: When i replaced...
  20. 32/36 dgev weber for 18rc adjustment q.

    Corona Forum
    I finally got the new weber (K744) installed but having some adjusting problems 1) idles a little ruff 2)boggs down when accelrating * had a hard time in the initial settings of trying to get it to idle This is what I did: When i replaced the old asian with the weber i plugged the intake...
1-20 of 162 Results
Top