Search Results for ‘1zzfe’

If someone can confirm for me that this is TDC, I see the piston head at the top as well. If TDC, then what can I use to lock the cams and crank into place? I don't want to take the cover off before I lock them up because I saw in a video someone did that and the chain guide came flying out...

Guys, I have a question. So, my 1zzfe exhaust manifold was warped from both edges (cylinder 1 and 4). The mechanic hammered out the warp. Which fixed it. But i get a feeling a slight leak still exists specially when cold. or pulling under heavy load. I wanted to ask, what's the best...

Hey guys, I have a 2008 Corolla CE with the 1zzfe and a 5 speed transmission. I've been looking into a turbo kit from turbokits.com and I've decided to order it in the spring. I know these 5 speeds have been somewhat unreliable in a stock application, and I'm just wondering if anyone has any...

Hey guys, I'm just about to put an order in for some aftermarket headlight assemblies from amazon, but I'm planning on tearing them apart and installing some custom halo rings. Has anyone purchased a set of these that could possibly pull some measurements for me? I'd like to order all at once...

Hi I have a 2002 corolla s 5spd When I accelerate from a stop the car hesitates and won’t accelerate I find myself stepping in the clutch and waiting for the rpms to go up and clear the problem and than slipping the clutch. After that while driving it’s ok but hesitates every shift change at the...

😂🤣😅 What up guys? New here. I've been building Subaru's, diesel pickups, and just about anything else I can toy with for about 15 years and recently picked up a 2000 Corolla with a bad 1zzfe. It only has 118k miles on it, but owner ran it out of oil and its knocking pretty good. I wanted to know...

Hi , I got a pending code of P2770 in my 09 corolla with 1.8 L 1zzfe + auto transmission u341e. Alot of experts told me to check and service the solenoid which is accessible from the engine bay. but i am not able to locate where it is. Any know where i could find it? A photo maybe would be...

Hi all, I just recently got a new 'yota to add to the collection. My second day driving it I had hopped on the highway got up to speed (70mph) and was cruising when a felt a slight shake and my check engine light started to flash (Ran perfect before this). When I got home I used my scanner to...

FS: '08 1ZZFE 72k mile engine in 5 speed '00 Corolla parts car, & 1ZZFE engine core Sold!

Turbo Kit This Turbo Kit was purchased from Turbokits.com and is made for a 03-08 Toyota Corolla, Celica, Matrix (1zz-fe engines). It comes with everything that is needed to install it*. It is in proper working condition. It retails for about $3.3k. Asking Price: $2.4K Location: Houston, TX...

Hi everyone, I am driving a 2012 Corolla that has a 1ZZFE engine with 150k miles. I live in Venezuela in a zone where the lowest ambient temperature is 68 °F in the nights and it can go as high as 100 °F in the day. The car is used for commuting from house to work. I wanted to know wich oil...

I know this topic of the oil burning 1ZZFE engine has been covered before on this site. Other than replacing/rebuilding the engine, has anyone here had any success using an additive? I see old posts suggesting AR-X, Lucas Oil, Seafoam, ZMax -- but these all do different things. Is the problem...

am i correct to assume there is no difference from a 2005 matrix 1zzfe exhaust system to the 2006 matrix 1zzfe version/ My exhaust from the cat converter to the muffler needs to be replaced on my 2006 matrix xr and i'm looking to replace it myself as i know a garage or the dealer will over charge

My car has a 1ZZFE type engine and I want to try using Restore to see if it helps an oil burning cylinder. I found out that Restore shouldn't be used on VVT type engines, but the years are a bit uncertain for the 1ZZFE engine type in the '99 Corollas. I called a couple of Toyota dealerships...

Hey guys, I'm looking to boost my car and I have done some planning but need some technical advice. So far my plans are consisting of a custom turbo manifold made of the stock manifold and a T25 flange to fit the turbo off a Nissan 300zx which runs 5psi, custom inter-cooler setup in front of my...

Please see the video: https://www.youtube.com/watch?v=yaB0bnK4Vyc I have a hissing noise, accompanied by hesitation and rough idle on my 2003 matrix. I have replaced: air filter intake manifold gasket throttle body gasket iac gasket I have cleaned: MAF IAC valve throttle body...

New here, I've got a 2007 Corolla CE, 5 speed manual in Super White II. It's got 147,000 mi on it, but runs like new and doesn't burn any oil, unlike my 1st 9th gen, a 2003 that burned a quart between oil changes, even at 60,000. I've read so many threads on here, and now I'm finally joining...

Hi everyone, I will be rebuilding an oil-burning 1ZZ from my Corolla over the next few weeks and wanted some help from those that have done it. First, I know people have honed the cylinders and had great results, but there are some details missing. What grit honing stones did you use? I want...

Im swapping a used 1zzfe in my corolla meanwhile, Im going to rebuild the one im pullin out... I need pistons, rings, rods, bearings.. Generally all bottom end parts. Where is the best place online to get them?

Picked up a 2001 Corolla S and i'm putting a new 1zz-fe in it because the old one has something wrong with the bottom end. Can i unplug the harness & leave most of the sensors plugged in ? Do I need to take out the radiator? If someone can point me to a thread of a good write up I would...