Toyota Nation Forum banner
1-20 of 111 Results
  1. Corolla 6th Generation (1988-1992)
    TL;DR Battery drains rapidly while on and recently car won’t turn on replaced alternator and battery multiple times and haven’t been able to find a blown fuse or broken wire. Hello, I have a 1992 Geo Prizm (if unaware corolla with a Chevy badge) and I’ve run into an electrical issue that has...
  2. Corolla 6th Generation (1988-1992)
    I have a 1991 Corolla SR5 and recently it's been having a problem I can't quite put my finger on. After a while of driving, I come to stop or slow down, and once I start going again my rpm drops immediately and it stalls. Most times it won't turn back on right after it turns off. I have a strong...
  3. Corolla 6th Generation (1988-1992)
    I bought a '91 SR5 maybe a month ago although the guy I bought it from didn't have any side skirts. After finally finding sideskirts from a guy parting out an AE86, he sold it from under me not even a minute after asking him for the price. Does anyone know where I can find AE92 side skirts? At...
  4. Corolla 6th Generation (1988-1992)
    friends, I have a toyota corolla ae92 1993 carbureted automatic transmission, that has been presenting a problem, when I take a hill it loses power a lot, and I have to press the acceleration pedal almost to the bottom, I already checked carburetor, fuel filter, spark plugs, distributor, filter...
  5. Corolla 6th Generation (1988-1992)
    The suspensions of E8-E11 Corollas are somewhat similar, but there are differences. Is there someone who drove all four types? What are the differences in handling and performance? Which is the best?
  6. Corolla 6th Generation (1988-1992)
    I had to swap the head gasket on my 4afe ae92 corolla, and have ended up with a ground wire connected to the body n one side and loose on the other. Passenger side of the engine bay, seems like it should connect to the fuel rail. Wanted to double check before I put it somewhere bad and destroy...
  7. Corolla 6th Generation (1988-1992)
    Hi, pretty new to the toyota community. I bought a 1991 AE-92 Corolla 5-sp manual last week and while coming from a U turn and going into 1st, it shut off on me. It now cranks but doesn’t start. A friend of mine who owns a few toyotas tells me it might be my fuel pump so I take the fuel sending...
  8. Corolla 6th Generation (1988-1992)
    Hi everyone, I have a 1991 Corolla sedan and I wanted to know if it's safe to position a trolley jack in the middle of the centre beam which runs under the engine and gearbox? Thanks in advance
  9. Corolla 6th Generation (1988-1992)
    hey guys new to this forum and had a couple of questions on what people have used for a front lip on there corollas ? ive got a 1990 corolla ae92 any help would be awesome, i know most lips from other company's would need some modification so thats fine
  10. Corolla 6th Generation (1988-1992)
    Hello, i just want to know where my tail lights came from and history behind it. Thanks! :D
  11. Corolla 6th Generation (1988-1992)
    I have a 1988 5-speed sr5. I am looking into doing an engine swap from the stock 4af to the 4age. Is it possible to convert the drive train to rear wheel drive from the stock front wheel drive? If it is possible, would it require me to convert the rear brakes from drum to disk?
  12. Corolla 6th Generation (1988-1992)
    I own a 1988 sr5 5-speed and am looking into swapping in a 4age motor for the stock 4af (if you have any suggestions for which 4age, please feel free to mention it). I think a lot of people only think about going fast and they never really consider stopping with the added power. I am trying to...
  13. Vehicles
    Hi all, I have a 1988 Toyota Corolla Coupe SR5 5-Speed Manual for sale. I apologize for solely joining this forum to post it for sale, but since there are enthusiasts here I figured this might be better suited to find a good owner here since this car is pretty old. One Owner 187,xxx miles All...
  14. Corolla 6th Generation (1988-1992)
    Hey everyone I just bought Coilovers and installed them and overall so far they’re great. I love the ride and the more aggressive steering it provides. And so I decided to the pull the trigger on wheels and tires. I didn’t want to get anything too big. But I was upgrading from 14s so I wanted...
  15. Corolla 6th Generation (1988-1992)
    Hey everyone. Still working on my ae92 corolla little by little. Trying to get it looking and feeling very composed and complete. But I’ve been running into trouble finding a part. And it’s a really simple part. The majority of modified corollas of this gen are running a wagon face and the...
  16. Introduce Yourself Here
    Hi, name's David. I ended up stumbling upon this site while I was unable to apply to a similar site due to some internal errors but oh well. I own a '90 Corolla GTS which was gladly purchased around last summer and has been a joy to drive. First time in a car forum so yea, what's up! Also...
  17. Corolla 6th Generation (1988-1992)
    Hey there, I spent maybe 30-40 minutes trying to figure out how to get off the plastic bezel with PRND21 on it. (The piece that the shifter itself fits inside of) Me and a friend tugged at it full strength and it still wouldn’t budge. Even when I thought I was gonna break it, it didn’t even...
  18. Introduce Yourself Here
    Hey there, my name is Juan Glad to be here I’ve been on here a lot for information ab the interior of my 1992 Corolla Sedan and it’s been extremely helpful. I’m signing up officially now because I have a question that hasn’t been asked yet lol. Hopefully someone here can help.
  19. Corolla 7th Generation (1993-1997)
    Seen this question a lot is there poly Bush for ae100/101, lot people who have Ae82 to ae92 etc asked the same., and I know a fair bit of the suspension is the same from the ae82 to ae92 to the ae100/101. But anywhere I looked I cant find a definit answer, 1, is there poly Bush kit for...
  20. Corolla 6th Generation (1988-1992)
    I plan to swap my 4AF to a 4AGE. I know I will need 4AFE or 4AGE fuel lines, fuel pump, fuel filter. My main concerns are the wiring and the exhaust. Can someone who has done it give me some advise/tips?
1-20 of 111 Results