Toyota Nation Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Sequoia Forum
    Hi guys I have a 2004 sequoia and I recently purchased a grease gun and some synthetic grease. I found the joints on rear diff side on shaft, and on transfer case side and front diff side. I think there were 6 of them. Are there any other joints or points where I need to grease up. ? I didn’t...
  2. Tacoma 1st Generation (1995.5–2004)
    Hi I have a 99 Tacoma Prerunner V6, just changed the rack and pinion, upper and lower ball joints, and outer tie rods. And mounted 4 new tires. After all that the steering is way too easy to turn and the truck feels unstable at higher speeds. I've quadruple-checked everything to make its not...
  3. T-100 Forum
    I'm doing ball joints and tie rods and drivaxles and all that good stuff on my 97 t100 4wd, and for the life up me i cannot figure out why upper control arm is frozen in the down postion, i mean i cant lift it up at all and especially not enough to get the steering knuckle back on to it. if i...
1-3 of 3 Results
Top