Toyota Nation Forum banner

body

  1. Camry TRD side skirts

    Camry 8th Generation (2018+)
    Anyone with a TRD have an issue of the side skirt peeling off at the rear end of it. Mine does on both side, look like they didn't use an adhesion promoter for the two way tape. The car doesn't even 5000 miles on, no scratch on the side or underneath they peeling off by themselves.
  2. Bumper Covers? 2005 Camry XLE

    Camry 5th and 6th Gen '02-'11, Solara '04-'08
    I'm currently looking to purchase a bumper cover for my 2005 Camry. The trim listed on the back of my car says that it is an XLE, but when I run the VIN it says that my trim is an LE. When I look up bumper covers for either the LE or XLE there are none available anywhere with the holes for fog...
  3. How an Air Intake Works

    General Discussion
    I took apart the air intake on my G35 and made a short video on how it works: Its pretty neat to cut open some of the components inside the air intake system. Here is the entire air intake system removed: Of notable mention: The accelerator pedal sensor uses two potentiometer tracks. These...
  4. help me avoid mistakes in restoring LJ70 LandCruiser, please!!!

    Land Cruiser Forum
    A friend sold me an old LJ70 when he recently moved. The mechanical side of it is making progress, and it's almost time to start restoring the rusted and somewhat beat up body. I'm living in Tunisia and labor is pretty inexpensive, though its quality is not always high. What advice can you...
  5. ask for help in after-collision body repair

    Camry 5th and 6th Gen '02-'11, Solara '04-'08
    The head of my 2006 camry hit the passenger door of another vehicle, and the front is of course damaged. Bumper cover is cracked slightly. The metal bar behind that is distorted on the driver's side, so is the piece perpendicular to the metal bar. The frame overall seems to be bent by 5 degree...
  6. ask for help in after-collision body repair

    Introduce Yourself Here
    The head of my 2006 camry hit the passenger door of another vehicle, and the front is of course damaged. Bumper cover is cracked slightly. The metal bar behind that is distorted on the driver's side, so is the piece perpendicular to the metal bar. The frame overall seems to be bent by 5 degree...
  7. Cleaning 2009 Camry Gen 6 Throttle body and IAC valve

    Camry 5th and 6th Gen '02-'11, Solara '04-'08
    HI all. I checked and couldn't find any DIY threads with steps or info or other experiences. (See edit at the bottom of this post) Can anyone provide? I have a 2009 Camry which has the well known very bad vibration at idle when in drive at a light. My Ultragauge shows the RPM are very low when...
  8. lip kits??

    Corolla 7th Generation (1993-1997)
    Curious to see if anyone has been able to find a decent lip kit for this generation. I'd rather keep OEM bumpers and a lip then rice out the entire way with a full body kit. Suggestions and links welcome
  9. GEN 6 Camry LE to SE body

    Camry 5th and 6th Gen '02-'11, Solara '04-'08
    Hello, I own a 2008 Camry LE. I wanted to know if there is any possible way to add the SE front and rear spolier lip to my Camry? I would like to avoid in buying new SE bumpers. All I want are the front and rear lips, and side skirts. Please help Thanks.
  10. Dead Cressy!

    Cressida Forum
    Hey there forum! As of recent i have purchased a most lovely 1989 Toyota Cressida GLX. On an even more recent timeline an accident out in an empty industrial estate near Browns Plains she runs no more. Engine is flat dead, blew the ass end out of it :c The question is, now i have the cleanest...
  11. Missing Body Part - 1994 Corolla DX Sedan

    Corolla 7th Generation (1993-1997)
    I need help! My Toyota dealership was beyond clueless.... A piece is missing from the rear passenger side of my 94 Corolla DX Sedan. It's a thin piece that fits under the rear passenger tail light and above the bumper. It's approx 2 inches tall and runs the length of the tail light assembly. It...
  12. Body kit De-Assembly

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    does anyone have a front and rear picture diagram of how to take off the kit on the xrs models? i want the front 2 pieces on the side and the 2 rear pieces on the back under the bumper? anyone know? ive been searching on the forum but all i found was the front with NO bodykit attached to the...
  13. 1985 Landcruiser BJ70LV In need of rear quarter panels

    Land Cruiser Forum
    I have a 1985 Landcruiser BJ70LV that needs some rear quarterpanel replacement and I'm having troubles finding them. What other trucks have the same wheel well contour? Where could I get after market ones if so please help
  14. PN's and parts source for front end-'95 Avalon

    Avalon 1st Generation (1995-1999)
    Well, I didn't attempt driving yesterday after an ice storm hit Dallas/Ft.Worth Monday night. Today, however, I succumbed to the "black ice" on the freeway, spun out, hit the median, etc. They don't budget for sand trucks here, so everything's still pretty treacherous. The extent of the...
  15. 1978 Toyota Corona Restoration

    Corona Forum
    Attempting to fix up this Corona, Just had it painted, looking for misc body and Interior items, Right front marker lens mounted on fender, left interior A pillar trim, glove box door, ash tray, door seals These old cars are hard to find parts for, but they have such an amazing look about...
Top