Search Results for ‘control arm bushings’

Hi all, Today I was told by my dealership I need new lower control arm bushings(also referred to as a wishbone or "A-arm" to the tune of $1,950! As an "older woman" who has been ripped off in my youth by a mechanic saying I needed new sway bars.(only to be told years later that repair back in...

I just replaced the rear bushings on both front control arms on a '92 Camry 2.2L XLE FWD, and while putting everything back together on the right side the knuckle pulled on the CV axle and may have pulled either the inner joint out of its "socket" or the entire assembly out of the transmission...

Hey guys, I have read so many threads on here so now I would like to ask for some help. I have 99 corolla CE. I first replaced Rotors, pads, drums, and shoes and then took my car to get an alignment where they told me I needed new inner tie rods first. So I installed inner and outer tie rods...

My driver side control arm bushing is swollen and needs to be replaced (not the bushing/bracket assembly...the other one). Is this done easily? I know some bushing replacements require the use of a press. Not sure if that is the case here. I thought I would save a few bucks and replace just the...

Hello Comrades! 2003 Camry V6 Auto 4 speed; just installed: remanufactured cv axles (cardone) new strut assembles (FCS auto) new wheel bearings (timken) new ball joints new sway bar bushings (moog) new inner & outer tie rod ends new lower control arms with bushingsWithin 500 miles of new, both...

Greetings ToyotaNation, I was wondering if anyone has had premature wearing of ther front control arm bushings on their 2006 camry le. Had my wife's car in for service today ( only planning to have an oil and lube done ) Service manager told me that the front control arm bushings are bad and...