Toyota Nation Forum banner

crankshaft

  1. p0335 error code "Crankshaft Position Sensor"

    RAV4 3rd Generation (2006-2012)
    Hey guys! I have a 07 Toyota Rav4. The other day I got the error code P0335 "Crankshaft Position Sensor "A" " thrown at me, but was not noticing any stalling or weird car starts. Today, I go to get in my car to go to autozone to buy the crankshaft sensor, and my car started, it lugged along a...
  2. Specifications

    Avalon 1st Generation (1995-1999)
    Well, to quote another source Mr. Haynes is not the most reliable of sources. I find some of the specifications for the crankshaft are different than posted on other sites. I'm looking for the correct Specifications for a 95' 1 MZ FE. Hopefully there are some charts online that are not part...
  3. Crankshaft and Camshaft Refuse to Rotate for Alignment

    Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    Hey there! Changed water pump and timing belt on my 98 Camry with the 5SFE with 205k miles because the timing belt broke, now the crankshaft won't turn with a breaker bar and the spark plugs out. It was overdue for an oil change, any idea why this is? It rotates about 15 degrees in both...
  4. Remove crankshaft without removing engine?

    Corolla 9th Gen/1st Gen Matrix (2003-2008)
    I have a 2004 Corolla that started having rod knocking. I pulled the oil pan and removed the rod caps to expose the rod bearings. 1 set is slightly worn, 2 sets are worn with slight damage, and the 4th is heavily damaged to the point where the journal is damaged. So, I need to pull the...
  5. Stubborn Crankshaft Pulley Removal

    Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    So, I was replacing my girlfriend's 1996 Camry's front brakes and as I was testing the car out, I heard a wonderful noise coming from the drive belt assembly. I thought it might be a belt problem but after inspection, it appears to be the harmonic balancer wobbling really bad. I looked and it...
  6. Removing pistons on the 3VZ-FE, need help

    Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    Hey guys So I've finally found the right socket set to take the pistons out, only problem is I've encountered a problem almost immediately I can't pull the bugger off :lol: Basically I've flipper it upside down and used the 14mm socket to pull the 8 bolts holding that plate down that sits...
  7. Replaced head gasket and can't get car to start, '95 2.2ltr Camry

    Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    Have replaced a leaky head gasket with the help of some friends, but we can't get the car to start. It's turning over but won't catch. Fuel in flowing and plugs are sparking. Best guess is that the timing is out 180 deg. Does anyone have other suggestion as to what might be the problem, or is...
  8. WTB: Good 7AFE crankshaft

    Car parts for trade, wanted parts, or free offers
    Hi all, I'm looking for a good condition (no cracks/scratched journals, etc) 7A-FE crankshaft. If you have one, PM me or email me at:: t.mcginley.jr @ gmail.com They have reman'd ones on Rockauto but I think $240 is too much for a regular used 4-cyl crankshaft. I'm located in NJ, but will...
  9. FS: Unorthodox Racing Underdrive Pulley 5SFE

    Car Parts for Sale
    Seller Name: Chris Location: Charlotte, NC Payment Method: PayPal (no gifts) UR Underdrive Crank Pulley for the 5SFE engine (made for an MR2 but will fit any 5SFE). In good condition. A little dirty on the backside, but nothing that can't be polished out and cleaned up. Used on a Gen 4 Camry...
  10. Crankshaft and Camshaft Alignment

    89-95 Toyota Pickup/Hilux
    My 1995 3.0L V6 Pickup with Manual Transmission failed to start the other day. I realized that the timing belt had been stripped of its teeth at the crankshaft gear. So, every time I was cranking the engine, the crankshaft was spinning, but not the camshaft gears. I believe that this engine is...
  11. timing belt : how many seals?

    Corolla 7th Generation (1993-1997)
    4AFE (97 corolla) When changing timing belt -how many seals are there to replace? Is there only 1 camshaft seal or 2 (same part number) for 4AFE? Is the "crankshaft seal" the same thing as "oil pump seal" or are those 2 separate seals? What about water pump - the car has inly 75K miles...
  12. home made tool to tighten camshaft sprocket nut

    Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    I was thinking about how to make a tool to tighten the crankshaft bolt...I did not want to go and buy one...and did not feel like taking out all the welding equiptment..so I came up with a tool that anyone can make. All I did was go to home depot and buy a one inch pipe floor flange, a one inch...
Top