On the way home from work, I had someone pull into my lane, forcing me into the guard rail. :frown: Can anyone refer me to a place where I can buy body parts for my 2015 Camry SE? I'm going to need a passenger fender and a lower front bumper.
This has been bugging me for a while. Does any one else's hood fit like absolute trash? It seems like my hood is too high at the windshield end, sitting above the fenders. Also, the gap width between the hood and fenders actually varies; narrow near the headlights, widening out in the middle...
Trying to find out if a Japan built fender will work for a Canadian built car. I have a 2010 corolla that was made in Canada. Someone backed into it. Found a 2011 at junkyard and paint is perfect match but the car was made in Japan. I did alot of googling but nobody seemed to have an answer if...
Whenever I get a heavy rain my 98 camry gets about 1" of water under the carpet of the passenger seat. I already checked the AC drain (not plugged), and then removed the cowl on the windshield to make sure the drains into the wheel wells were not plugged (they aren't). Fed up with the problem...
My friend rear ended into someone's car and the air bags deployed ( Lucky he didnt get flying sharp projectiles since the airbags have not be replaced by the recall). So I bought the car from him for cheap. The car runs pretty strong and everything seems to be fine ( only has 110K...
Hey guys, I'm new to the forum and I could really use your help.
I have a 1994 Sunset Silver Metallic (Paint Code: 192) Corolla with a front bumper and passenger fender in "not-so-great" condition. Would love to repaint it but the cost of the original paint is too damn high. I am on a super...
I'm an idiot..
just picked up this used 2012 Matrix (can't believe how well priced these things are) and I thought I'd play superman and drove over a small snowbank.
turns out that the snowbank was ice and cracked my bumper.
so I'm curious about the best way to fix it. My thoughts were...
Got a 07 camry se, got wheels on but the wheels are poking out. I was just wondering if there are fender flares out there to bring the wheels in and make It in the wheel well. Any info or suggestions are welcome.
Well, nobody else on the internet posted a how-to on how to remove the front bumper/fender on the MKI MR2, so I will be the first.
!! Read first !!
You will need:
10mm wrench. (A ratchet works wonders)
Ziploc bags (to mark which bolts/screws are which)
So long story short, I backed into a cement pylon and to my surprise it looks like someone hit me going 50mph! I want to try fixing it as much myself as I can to save money. The bumper will be no problem but the quarter panel and inner trunk wall is a problem I don't know how to tackle. I...
So i ordered some Fender mirrors the other day(: and i just took of the passenger mirror on the cressy today and i realized that after i take it off I'm going to have this hole that goes into my door panel... what do i get to help fix that? is there a specific piece that goes right on there? A...
Has any one ever seen these stains on a new car before? It seems as if the tire shine the dealer sprayed on my new car caused the paint to spot.
I went back to the dealer today to get it checked and they don't believe me... The car is 2 days old, and I haven't driven it anywhere that could of...
My Super White XLE is coming under attack to road rocks and dings. I found a couple of small but visible rock dings on the front fender and was wondering if getting the touch up paint would hide it cleanly.
Any one else have experience with this?
If you don't, you should. I removed the fender liners and look what I found:
Obviously it's been a few years since I cleaned the gunk out of there, neglecting to do so is a sure way to have the fender rust through.
I have an old Toyota starlet car
Am unable to open the passenger door on the front left.
My car hit a piece of wood on the seaside it damaged the left fender at the bottom, now the fender and the door are touching together.
I tried to remove the fender but there are still bolts...