Toyota Nation Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 21 Results
  1. Corolla 9th Gen/1st Gen Matrix (2003-2008)
    Today I hit a racoon while driving my mom's car. I was going the speed limit of 70 kilometres per hour. The impact cracked the lower portion of the bumper on the passenger side, the fog light cover is missing, and the bumper seems to be wiggling more than it should. I live in Mississauga...
  2. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    Toyota Camry LE, 2005 My Camry has a pristine, untouched front bumper. Have never carried the front license plate (it is in the trunk). However, I was told that here in Texas, where I have to take the Road Driving Test, the front license plate is required. I had no idea there were so many...
  3. Sequoia Forum
    Does anyone have a schematic for the Sequoia front bumper cover that i could reference for removal/repair? One side of my bumper cover is out of alignment (i.e. sticking our away from front right fender) and I need to see the full set of parts that need to be removed to understand what I need...
  4. Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    Every time I get out of my 2013 Corolla L after a drive, a part of the passenger front bumper is popped out/hanging right under the headlight. I seem to be able to "lightly push" it back into place so that the front bumper is more or less flush with the quarter panel... but I dont hear any...
  5. Car parts for trade, wanted parts, or free offers
    Im located in Braintree, MA 10 minutes south of Boston. Willing to travel along the east coast for these parts. I have a 91 corolla, need a hood, front bumper, and if you also have them the grill, and headlight support brackets. Looking forward to hearing from you, need these parts asap. -Nick
  6. Yaris/Scion iA, Vitz and Echo Forum
    I noticed that the front bumper cover does not align well with the fenders on my 2007 Yaris Sedan, and figured out that the clips (for lack of a better term) that hook onto retention tabs are broken. The picture below is not my car, but a screen shot from a YouTube video that shows the clips...
  7. Highlander 1st Generation (2001-2007)
    I want to buy a pre-painted (green) front bumper for a 2001 Highlander. It needs to have the holes for the fog lights and holes for the parking sensor. Does anyone have a suggestion for the best deal on a replacement bumper?
  8. Camry 7th Generation (2012-2017)
    I need to replace the front bumper cover of my 2012 Camry SE. I have found several replacement part sites with prices ranging from around $130 - $200+. A lot of the replacement bumpers I'm seeing say except SE. A site I found that actually has local pickup in my area and is reasonably priced...
  9. Car Parts for Sale
    Hello Guys, Up for sale is a full Toyota Corolla Fiberglass Body kit $100 Local Pick Up Only or half way meet up. Same Style as recently feature in the ToyotaNation.com newsletter that came out looking pretty good...
  10. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    Hello All, I have seen numerous questions about where to obtain a replacement tow hook cover and a bunch of answers that, while possibly useful, were less than practical or reliable. By the tow hook cover I am referring to the square plastic cap on the passenger side of the front bumper. The...
  11. Camry 7th Generation (2012-2017)
    I've been hand washing and polishing every mark out of the paint for the last 8 months and this happened: https://plus.google.com/u/0/photos/109145790482759509941/albums/6041161317328154177 I was turning into a friends very tight driveway and they have a short brick wall with bricks jutting...
  12. MR2 Forum
    Well, nobody else on the internet posted a how-to on how to remove the front bumper/fender on the MKI MR2, so I will be the first. !! Read first !! You will need: 10mm wrench. (A ratchet works wonders) Phillips screwdriver. Ziploc bags (to mark which bolts/screws are which) Lug wrench. Car...
  13. MR2 Forum
    Hello, I'm new to this section of the forum. Previously I owned a 1989 Toyota Camry LE, but sold it to purchase myself my dream car, a 1987 Toyota MR2. I recently drove down to Pennsylvania to purchase a new front bumper for the car, and I've finally finished repainting it. I'm ready to mount...
  14. Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    I've been looking all over and I cannot seem to find any direction on how to remove the front grill of the 10.5 gen Corolla. I would like to put the ZR6 grill in on my own but don't want to take the bumper off until I'm completely sure of what to do.
  15. Corolla Older Generations (1969-1987)
    Hello people. Could anyone tell me how to disassemble the front bumper of a Toyota Corolla 1987 please? Regards.
  16. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    Hey, I have a 08 Camry LE, is it possible to install an SE front bumper valance on it? Or do you have to buy a new front bumper?
  17. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    Hi, Here are pics of my 2005 toyota camry le damaged front bumper. Also note that there is a dent in left door/bumper intersection. should I replace this or repair it? can you tell auto body shops in Colorado who can do it for cheap? http://imageshack.us/photo/my-images/23/left2o.jpg/...
  18. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    I'm trying to remove my Front Grille to my 2009 Toyota Camry. I was told it was easier to probably just remove the whole bumper so I'm looking for threads about it on here and can't find anything. I removed all the screws (that i know of at the bottom), the 2 side ones under the wheel wells...
  19. Highlander 1st Generation (2001-2007)
    Hola Highlander owners! I have been searching for a front bumper skid protector as well as a rear bumper sill on ebay but have been out of luck. It seems the first generation highlander aftermarket selection is weak sauce. (search ebay for picture description of parts) Has anyone purchased the...
1-19 of 21 Results
Top