Toyota Nation Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Corolla 9th Gen/1st Gen Matrix (2003-2008)
    I have a 2005 Corolla XRS which hasn’t had a working e-brake since I bought it, it had rear disk brakes with a drum hand brakeoriginally it was seized, but after purchasing the power stop drilled and slotted rotors I also purchased a new spring kit and pads for the hand brake. I was able to get...
  2. Corolla 9th Gen/1st Gen Matrix (2003-2008)
    Hi all, I have an 05 Corolla XRS and the handbrake assembly on both sides is completely toast, and I need new lines ran as well. However, winter is starting and there's a significant amount of snow on the ground. If I get all the parts including the backing plate for the hand brake on either...
  3. Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    I need to change my rear brakes on my 2010 Matrix. According to my Haynes repair manual, I first need to loosen the hand brake cable which is found under the center console. My problem is, is that I can't figure out how to remove the center console!!! The instructions in the Haynes repair...
  4. Yaris/Scion iA, Vitz and Echo Forum
    I have a 2008 Yaris and the handbrake freezes when engaged (I set it after parking but then can't get it to release, leaving me stranded). Any ideas what the problem is or is this just poor design? I managed to force it to disengage with a screwdriver but I now no longer use the...
1-4 of 4 Results
Top