Toyota Nation Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 30 Results
  1. Highlander 3rd Generation (2014-2019)
    I'm confused: the OEM harness has the 4 pin connector that goes to the 4 pin inside the trunk, so what does the Converter box actually do? It plus into another connector, and I don't quite get how they work together. Anyone can explain this to me please? Thanks
  2. Sienna 2nd Generation (2004-2010)
    Thank you for any help you can provide to a forum newbie. 2008 Sienna LE purchased new; dealer put after-market Curt hitch and 4-wire on the rear bumper, which works great. I am now adding an adapter to a 5-wire system. The new wire is blue and is to be tapped into the signal for the reverse...
  3. Highlander 4th Gen - Hybrid (XU70/2020-Present)
    Hi All! I currently have a ‘21 hybrid with an aftermarket hitch installed (the Curt hitch). I currently use this to tow a tent/pop-up trailer with a dry weight of approx 1800lbs/GVWR of 2750. I know the hybrids have a 3500lbs GVWR. I’ve found a hard walled trailer that’s fiberglass and is about...
  4. Highlander 3rd Generation (2014-2019)
    I already had the Toyota hitch and 4 pin connector installed by the dealer. 2019 Highlander XLE AWD. I decided to add a wired Prodigy P3 brake controller and needed to convert the OEM 4 pin to aftermarket 7 pin. I wanted good quality work and without the connector hanging down below the...
  5. Highlander 4th Generation (2020+)
    Does anyone have the Thule Swing 4 (p/n 9027XT) mounted to their Highlander hitch? Wondering about experience, ease of use, interference with backup camera system.
  6. Highlander 4th Generation (2020+)
    Hi! I am new here and just got my XSE. My old vehicle had Uhaul hitch and the Swagman xtc2 tilt bike rack was equipped. I read this post, and a bit of concern about the OEM hitch...
  7. Highlander 4th Generation (2020+)
    Thanks to all of the helpful information in this forum I think I've figured out how to add the tow hitch to my new Highlander. The local dealers want a steep labor charge to install this "Build a Toyota" advertised accessory that is actually unavailable at the quoted price. However, much to my...
  8. RAV4 5th Generation (2019+)
    Anyone have experience on putting a Saris Superclamp EX 4 onto a 2020 RAV4 LE Hybrid? We've heard the it might not fold down properly (when not in use) because the trunk design? Thanks!
  9. Highlander 4th Generation (2020+)
    Well, I was just rear-ended at about 30mph as I was stopping for a left-turning vehicle to complete its turn and the guy driving a Corolla was not looking what so ever rear-ending my car. Lucky me I just installed Curt hitch this week and put a rubber plug in the 2" opening. My car - a couple of...
  10. Venza Gen1 (2009-2016)
    I have a few questions 2011 venza 1. If windows(except for driver) stopped working as well as drivers heated seat, and driver door locks. What can it be. (Already checked little fuses. 2. Does it pull a raft trailer well if I were to put a hitch on it? 3. What tires for everyday driving and some...
  11. Highlander 4th Generation (2020+)
    Anybody know why there isn't currently a hitch available for the 2020 Limited and Platinum Highlander? I am ready to order the vehicle, but there isn't a hitch as an option and I want to ensure that it is something I can get installed after the fact. Dealer hasn't been able to find out as of yet.
  12. 89-95 Toyota Pickup/Hilux
    I need a hitch on my 88 Hilux and I was wondering what I should get because nobody seems to know what it is and what will fit it, I was wondering if the frame was the same as a regular 88 Toyota Pickup then that model hitch would fit it? Thanks
  13. Corolla 9th Gen/1st Gen Matrix (2003-2008)
    Hello, I have a '08 Corolla and I bought a hitch receiver from CURT (Class I hitch, for a bike rack). It came with 4 bolts (M12-1.25). The car has 4 holes, supposedly they should have a nut that's welded in the frame but I don't think its there anymore OR the thread is completely worn out on...
  14. Land Cruiser Forum
    Hopefully a simple question: What is the size of the trailer hitch on the 2017 Land Cruiser? Hate to ask here, but i'm away from my vehicle and i'm trying to order a bike rack so it's at home for me when i return home. Is it 1.25" or 2"?
  15. Sequoia Gens 1&2 (2001-2022)
    I have installed a receiver hitch and wiring harness on an '07 Sequoia. Only problem is that I don't have any voltage going to the wiring harness, and thus no trailer lights. Disconnected it and tested at the connectors under the back bumper--nothing there either. Have checked the 30 amp...
  16. Truck/SUV/van parts for sale
    FS: 1st Gen 4runner Class C trailer hitch good shape, i think it also fits the trucks. 84-89 $100, heavy local p/u or you figure out on how to ship it. NV ,Las vegas
  17. Truck/SUV/van parts for sale
    The reason for selling is because I traded in my Highlander. Everything for sale are in like new condition $50 Curt Class 3 Trailer Hitch Receiver (13534) with Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector (with factory tow package - converter...
  18. Highlander 1st Generation (2001-2007)
    Issue: My battery keeps draining out every 2 days of non-driving. & occasionally, guessing the leak its not sending enough power to the shift solenoid in 2nd gear. Recent updates to car: Recently I replaced the factory with a Sony player + Sirius wired outside antenna nub on roof & also had a...
  19. Tundra 2nd Generation (2007-2013)
    Hey guys, new here. Not sure if this is the right place for this... I have an aftermarket class IV hitch and bumper mount. I had it on my 08 sr5. Looking to sell. Paid $350 for the hitch and $300 for the bumper mount. Looking to get $300+ shipping. Let me know. Thanks!
  20. Corolla 9th Gen/1st Gen Matrix (2003-2008)
    Hello this is my first post here! I'm getting a Saris Bones 2 bike rack this weekend and I want to loop a 15' cable lock through the bike rack and my new bike and lock it to the car's frame. However I'm having a hard time finding a mounting point under the rear of the car. Anybody have any past...
1-20 of 30 Results