Toyota Nation Forum banner
how to
1-13 of 13 Results
  1. 1997 Rav4 under truck splash gaurds

    I have put these on a few times.. but that center piece never gets or goes on! What am I doing wrong? please help me lol after doing my boot/ axle etc not having a protection over all the work I've done is driving me crazy. I have looked but with no luck to help me figure it out so I come to...
  2. Sequoia Forum
    A while ago I replaced the front brakes on my 2005 Sequoia Limited and created a basic how-to video to help others. Pretty simple job and I wasn't expecting that. Saved about $150-200 as well! Check it out here:
  3. Tacoma 2nd Generation (2005-2015)
    I upgraded my headlights to HID which gave my 2009 Tacoma a great look. Thought I'd create a how-to video for anyone attempting to try:
  4. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    Here's how to install fog lights on a base model Toyota Camry. There has been discussion about this before in this thread from 10 years ago: http://www.toyotanation.com/forum/104-camry-5th-6th-gen-2002-2006-2007-2011-2nd-gen-solara-2004-2008/205437-installed-fog-lights.html I figured I'd...
  5. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    My car was bumped into in the parking lot at work today by a coworker and dented my front bumper. we were able to pop the dent back out and there is only a little scratch left, but the left side of the bumper is out. Can we just pop it back in? Or will I have to take it to the shop to get repaired?
  6. Prius 2nd Gen - Hybrid (2004-2009)
    Hey guys here is a quick little video tutorial for anyone thinking of using Uber or Lyft to make the most out of their Prius. The one shown is a 2009 model. (2004-2009) 2nd generation Prius. Should be the same for the 3rd generation model. If you have any questions or better set up or...
  7. Corolla 9th Gen/1st Gen Matrix (2003-2008)
    I recently had an incident backing out of my driveway, with no major damage. But the driver side rear bumper filler panel was badly dented. See the image for a better idea. (It took me a while to find out what it was called.) I have ordered a replacement panel and I would like to replace it...
  8. Venza Gen1 (2009-2016)
    This review needs a short intro story... About 8 years ago, I had my first experience with a 55w HID kit. Literally, 1 day after installing the hid kit, I received a call from my customer telling me his headlight wiring harness had melted together, ground out, and shorted part of his fuse...
  9. Corolla Older Generations (1969-1987)
    Hello people. Could anyone tell me how to disassemble the front bumper of a Toyota Corolla 1987 please? Regards.
  10. General Automotive Discussion
    Buy yourself a service manual, it will have much more detailed (and correct) info than anything me or others could post here.
  11. Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    Well ToyotaNation, I need some sound advice. I've been driving her for 3 years now and I have to say that while it's reliable, safe and economical to drive, it's also a bit boring. I have a 2010 Corolla S with a 1.8L engine. I love the look of it, but it doesn't have anything that sets it...
  12. Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    It looks like a simple install but I wanted to make sure with those who have done it. Most of the earlier year oil dipstick tubes don't require to be pressed in and have an oil o-ring to prevent any leaking; the Gen 4 one, on the other hand, requires to be pressed in. So while the Gen 4 tube has...
  13. Tacoma 2nd Generation (2005-2015)
    VEHICLE IN VIDEO: 2006 4wd 4D Toyota Tacoma I got a flat tire and a high def camcorder, plus I'm a forum-using dude that likes to make vids in my spare time. Good mix ! When I got the flat, I couldn't find any slam-dunk writeups or videos, so I made one my damn self. I didn't find a...
1-13 of 13 Results
Top