Toyota Nation Forum banner

intake manifold


    Sequoia Forum
    Hello and thank you beforehand for your time and efforts! VEHICLE: 2003 Toyota Sequoia 4WD 8 Cylinders T 4.7L FI DOHC WHAT: There seems to be a coolant leak on the back of the engine right where the intake manifold is on the driver side. QUESTION: Is this common? What could it be? How serious...
  2. DIY - Gen5 2004 1MZ-FE 3.0L Valve Cover + Timing Belt

    Camry 5th and 6th Gen '02-'11, Solara '04-'08
    Hey All, [SIZE="4"] Here's some pictures of the valve cover/spark plugs and a timing belt job I did on my 2004 XLE V6 with about 118K on it. This is the first timing belt job this car has had. Valve cover gasket was done at around 52K. This job was done over a course of almost a month...
  3. Coolant in intake

    Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    On the 5SFE, are there coolant passages that run from the head into the intake manifold? I'm trying to track down how coolant is getting into the intake.
  4. Fuel leak?

    Highlander 1st Generation (2001-2007)
    So I am doing the valve cover gasket / knock sensor on my 2001 Highlander Limited V6. I got the intake plenum off and noticed a dribble of fuel on the circled area below the fuel rail in the photo and made me suspicious. I did take a sample and it was fuel so the question I guess is do I have...
  5. HELP: I have questions about removing the intake manifold from an 82 Toyota pickup

    Pre-88 Toyota Pickup/Hilux
    There's a thing called a "water plate" that attaches to the underside of the intake manifold on my 82 pickup (22R, 5 speed). While I was removing one of the bolts on the water plate it just kind of crumbled away and broke off from corrosion. It's leaking water at the seam between the water plate...
  6. '98 camry: mystery whir, soft brakes, and an idle rumble.

    Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    '98 camry LE l4 2.2 this is my first big(ish) car project and also my biggest mess up(s), so far. :grin: okay so I have a pretty big mess to clean up. :crying: long story short, i replaced leaking valve cover gasket, cleaned the valves, took off the intake manifold and seafoamed and cleaned it...
  7. Air Intake, Throttle Body Spacer

    Corolla 8th Generation (1998-2002)
    Hey guys. I'm thinking of getting an air intake and a throttle body spacer. For the air intake I was looking at a cold air intake from OBX Racing, or an air intake from Weapon-R "Secret Weapon". OBX racing makes a throttle body spacer that fits the 8th gen. Does anyone have thoughts on...
  8. Custom Painted Intake with Pics

    T-100 Forum
    I'm just sharing and hope to get the pics right (first time posting pics). I first blasted this in my cabinet, I have an HF Floor, with a custom gun I made out of theirs. I'm running an IR 5HP, 60 gal, rated at 100% duty (I bought the air in Jan, and can't say enough about it! worth it) I wired...
  9. planning massive upper plenum/TB/injector job

    89-95 Toyota Pickup/Hilux
    Hello all. I have a 94 2wd 22re DLX auto with 173000 miles. Its my daily driver @ 50 miles a day travel with a 50/50 spread on hwy/city. I'm getting 15-18 mpg with mixed driving, (easy driving mostly) I've inspected and replace all anything bad on the ignition side (have not checked timing)...
  10. 2000 Celica GT Swap Compatibility

    Celica Forum
    Hello everyone, First post in the forum! Thanks for all previous help. I've got a 2000 Celica GT with a dead engine I'm looking to replace. I know it has the 1zz-fe in it, but I also noticed that engine is used in other models/years: 2000-2005 Celica 1999-2008 Corolla 2000-2002 Geo Prism...
  11. Noob needs help removing intake manifold!

    Corolla 6th Generation (1988-1992)
    I have a 1990 Corrolla 4A-FE which needs a new head gasket. I have limited knowledge but I have chosen to tackle this myself. I have most of the work done to remove the head but I cannot get to the bolts on the underside of the intake. I have the car jacked up because I do not have a picker. How...
  12. Intake Manifold Removal Help Needed!

    89-95 Toyota Pickup/Hilux
    Hey All, Long time reader, first time writer... Reading your posts over the years has kept my '92 4x4 Toyota Pickup w/ a 22RE going to get 210,345 miles of happiness and functionality. Thanks for all your help. I need some help that I couldn't find in other threads: I was trying to...
  13. intake manifold question!

    Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    hello everyone i had a quick question hopefully someone can answer it for me! i have a weapon-r intake manifold for my xrs and i was wondering if i will be needing a different gasket since it is a different manifold or will the old one work(of course i will be buying a new gasket but the same)...
  14. Upper Intake Manifold Tubes

    89-95 Toyota Pickup/Hilux
    So I took apart my throttle body, upper intake, and fuel filter off to clean and i forgot to mark the tubes. I got a vacuum diagram so those are all back in place but i am confused on where the fuel lines go. COuld someone take a pic of the left side of their 3vze please :D
  15. 4af intake manifold option? Underdriver pully options?

    Corolla 6th Generation (1988-1992)
    I have a 89 corolla sr5 im working on currently. I have been told that you can port and polish the stock manifold in order to get better airflow from the carb to the cylinders. I was wondering if there were any options in after market manifolds or other manifolds that would work better. I am...