Toyota Nation Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Avalon 2nd Generation (2000-2004)
    my motor mounts are going bad, nearing 180k on my 03 XLS and ever since I got the car I could alway feel a slight lurch from a stop and a small clunk from R to D and vice versa, never thought anything of it until more recently my shifts started to become somewhat harsh, (trans is perfectly fine)...
  2. Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    Hi everyone. All 4 motor mounts on my '99 Camry were replaced about 600 miles ago, 2 months ago, with Toyota parts. After changing the mounts, the car idled smoothly again and shifting was fairly smooth, too. However, about a week ago the dreaded clunk/jerk resurfaced when shifting from Park to...
  3. Highlander 1st Generation (2001-2007)
    Hi everyone, I have some vibrations while in park and while in drive. Not really in neutral though. It sounds like the exhaust system is vibrating against the car, but I was thinking that it could be worn engine mounts. Are there any other suggestions as to what it could be? If it is the mounts...
  4. Corolla 8th Generation (1998-2002)
    Hello, *Does anyone know if there is any difference between 2000 and 2001 Corolla motor mounts?* I am looking for urethane or similar performance motor mounts for my 2000 Corolla VE manual. I found what potentially looks to be like a great product on Ebay...
  5. Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    Guys, I am trying to replace the rear motor mount on my Camry, but having a real hard time removing the top 17 mm bolt. I tried to use a breaker bar as leverage to an 17 mm wrench from the bottom but the nut does not budge. I also tried from the top using a 3/8 inch "U-joint" but the U-joint...
  6. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    I have a 2005 Camry I4 2.4 liter automatic. It vibrates a lot at idle, and possibly in drive as well, but I can't tell because my wheels have been off balance for so long that I can't remember what it used to be like. When I purchased this vehicle some years ago, the torque strut dog bone mount...
  7. Celica Forum
    Neither can my mechanic. Any suggestions? It's an 89 Celica GT 3S-FE Automatic built in 02/89. I appreciate any help. :)
  8. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    Hello, the car is a 2004 Camry LE 2.4l. I have been posting about a slight vibration when starting the car and in reverse and decided I'd start a new thread now that I think I've found the issue. I'm worried my motor mounts are going bad. Visual inspection makes it seem like they're good but...
  9. Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    I took my vehicle (1999 Toyota Windom/ES300 V6) in last week to a garage to have it check and was told that both of my front and rear engine mounts need to be replaced. (I have been feeling the engine movement when switching between drive and reverse) I have searched TN and other site but...
  10. Corolla 6th Generation (1988-1992)
    I'm tossing the option in my head of going with the front mount in the link below or just going all out and paying $98 for the OEM one...
  11. Avalon 1st Generation (1995-1999)
    Has anyone replaced this? It looks to be a fairly simple fix, but if anyone has tips or pointers, I'd appreciate it.
1-11 of 11 Results
Top