mount

Hello, I am a new owner of a 2018 Chr Xle prem. I have been shoping around for accessories to get for my new car and Iwanted to get a dash mount for my phone. I was wondering if the suction mounts would stick to the chr. When I look at the dash, it seems like a suction mount would would have...

All, I am looking for the torque spec for the engine mounts including front, back, and sides. I appreciate any help if anybody has access to such spec! I already spent more than an hour searching on google but not luck. Thank you with a big T.

hi guys i have a 1990 toyota camry that i love but it needs front and rear mounts. The car is a manual. i just need to know how long can i drive like this and how hard is it to replace the rear mount. i really need it replaced someone help me out

I recently replaced all four struts with brand new Monroe OE-Spectrum struts. All 4 new KYB bump stops. Used my original Toyota coil springs and coil insulators. Two front mounts were in good shape and bearing were in good shape also. I did not have any clunking noise before I changed the...

Here's how to replace the strut or strut mount using spring compressors on a Toyota or Lexus with MacPherson strut front suspension. I made a short DIY video on the process: While quick-struts are available for these cars, not all of them are made to the same quality and specifications as the...

I have a 2017 Camry Hybrid XLE and installed a 360 degree camera system. I know I can use the built-in entune monitor but I would like to install a second HD monitor on the dashboard somewhere. The problem is there aren't that many locations to mount anything. Some possibilities, marked on the...

This is how it should be standing but that rubber piece in there is really worn out and now it lays like this I barely noticed this morning how worn out it was, sounded like I was dragging some thing. Can anyone tell me what that rubber piece is called and possibly tell me how it can be...

1996 - 2005 Toyota RAV4 rear differential mount, NEW Part number 52380-42082. Located in San Francisco, CA Bay Area I take paypal and will ship via USPS.

Hello, the car is a 2004 Camry LE 2.4l. I have been posting about a slight vibration when starting the car and in reverse and decided I'd start a new thread now that I think I've found the issue. I'm worried my motor mounts are going bad. Visual inspection makes it seem like they're good but...

I recently bought a 2009 toyota camry le I4 this past winter and it has 155k miles. Now that it's getting hot, i've noticed a strange knocking/loud mechanical thumping noise coming from the engine bay when I have the AC ON and put the car in Drive or Reverse. The noise occurs at any blower motor...

I bought a Koomus cd slot mount. It works great, build quality is very high and doesn't obstruct much of car buttons/knobs. Fits most phones and can be rotated 360 Degree as well. I like it so far!

What cell phone mounts do you people use in your cars? I don't want the suction cup type or one that lays on the dash. The design of the round air vents doesn't lend itself to that style mount either. What are the options? I realized I posted this in the wrong section. I will repost if...

I picked up a Gentex GTNX-177 mirror and harness from ebay off a 2001 Camry, but after reading how to remove the stock mirror, I'm beginning to wonder if the new mirror is missing the spring clip that holds the mirror firmly against the shoe glued onto the windshield. I took a few pictures of...

Hello this is my first post here! I'm getting a Saris Bones 2 bike rack this weekend and I want to loop a 15' cable lock through the bike rack and my new bike and lock it to the car's frame. However I'm having a hard time finding a mounting point under the rear of the car. Anybody have any past...

Hey everyone, I'm looking for a new high mount brake cover for my 98 Avy because the stitching on my current one is falling apart. I have the gray interior, not the tan. Also, It has the premium audio system so I'm looking for one that has the subwoofer attached. I'm not having much luck on the...

Hey guys I was wondering if anyone knew what size bolts to use for the engine stand and where on the engine the mounting spots were. I was told I needed M12 x 1.25 bolts but I don't know what that means, I assume M12 is the metric head size and 1.25 is the thread size but not for sure haha...

I have a 2009 toyota camry le 4 cyl with 170000 miles. i had my rear main seal replaced because there was an oil leak. now after i got it back from the shop, there is a oil leak near the front motor mount and my engine had gotten louder when i accelerate. also it smells like paint or something...

Hey all. My good friend backed into my 2005 tacoma, broke the tail light and a small dent in the bumper. All not a big deal, but it also broke a hinge/mount off the tailgate. Does anyone know if it is possible to by a OEM or toyota mount to replace it... I really don't want to have to buy a...

I returned my leased 2010 Camry and got a 2012 Camry which requires different Kuda mount, so I'm selling this handcrafted, custom made real leather Kuda Base mount for iPhone, Android, cell phones, hands free car kits, iPods, PDA, GPS, XM satellite radio. Basically, it can be used for anything...

Had my tires balanced last week. Tire man said my left front strut was leaking oil. I have noticed a "clunk" sound in the mornings lately when pulling out of the garage and then rolling forward. So I am planning on replacing the front struts. Looks like there is a limited selection for a...