Search Results for ‘muffler’

Hello, this is my first post on toyotanation after reading various posts on here for a couple of years. Hopefully this is the right place to post this :) Basically, my car right now is a stock 2004 camry xle v6 with the 1mzfe engine, and I was looking to slight modify the exhaust to get a...

So I own a 1993 Toyota Celica ST (1.6 engine) Has had a tune up so it's pretty healthy (305k miles on it lol) but I've so far just put a short ram-air intake on it. Just that made a very noticeable sound difference, but I want a little more. I saw on RockAuto that the stock muffler inlet...

A little while ago I found that the connection between the resonator pipe and the axle back muffler was leaking. I was going to weld the hole, but today I found after taking it apart that the entire inside of the pipe is rotten and gone. Its not going to be salvageable. I was going to get a...

Call me stupid, I decided to delete my muffler on my 07 Corolla. It sounded cool for the first couple days. I’m now tired of the loss of power at take off and at low rpms. A car load of people feels like I’m driving around a peel p50 (slow). Anyways, I got it done at a local shop. They cut the...

I was replacing the muffler on my 2000 Camry 2.2L and everything was going smoothly at first. However, when I went to tighten the bolts, they were really hard to tighten. Instead of bringing the pipe together, it was just bending the ends of the flanges inward towards each other, it seems. It...

Hey guy! So I got this idea but I’m not too sure about how to go through with it. So I need some honest opinions even if it’s not something I’m looking to hear 😂 2003 with the 4.7L v8. I would like to install a cutout on because I just want to simply have one 😂. I want to be able to hear the...

I have a 77 Celica GT Fastback. I plan on redoing the exhaust with a header and 2.5" pipe. When 2.5" pipe is bent it becomes closer to 2.25" pipe. Factory it did not have a catalytic converter. I would like to put a 2.5" Moroso Spiral Muffler wear a catalytic converter would normally go.I am...

Hey guys, so I decided I want to put an aftermarket muffler on my 2010 corolla s but I’m having trouble choosing one. These are my top two choices so far: 1. Megan Racing MR-MU-N45-T - Universal Muffler - S-N1 Turbo 2.Magnaflow 14806 - Competition Core Stainless Steel Muffler (3" ID Center/4"...

Hey all, I have a 2004 i4 Camry, and I was just wondering if I unbolt the muffler is there going to be any issues bolting it back on? Like, is there gonna be a seal or gasket that I break that will be irreparable or need replacing? Or would I just be able to slap it back on? Thanks in advance.

Hey gang, So my girlfriend bought a 6th gen (5sfe) and for the past few months I have been fixing it up. Now we have gotten to the point where she says she wants it to sound better. I was just wondering if there are mufflers anyone knows of that fit up nicely (or close enough). I dont...

Installed by FMS Performance in San Bernardino, CA

Does anyone know how to remove and replace the two rubber exhaust hangers that hold the muffler? The other three were a piece of cake, but I'm not sure how to get these off.

I saw a video of a guy that put a CB on his 2010, have any of you done this? If so how does it sound? I'm looking around so if you guys have done stuff that sounds good I'm open to suggestions, (though keep in mind I can't afford a $500 system) Thanks!

does this look like it was installed correctly? I took the car to a second muffler shop and they told me the previous shop did it incorrectly and should have put in more pipe at the ends. They said it will probably come off after 6 months.

OK, on my many Ebay hunts lately, I cam across this exhaust setup for Gen6 V6 Camry.... http://www.ebay.com/itm/Fit-07-10-Camry-V6-Stainless-Steel-Bolt-On-Axle-Back-Dual-Exhaust-Muffler/192230445337 I was crazy skeptical due to the incredibly low price and was worried mainly about quality...

Hi wonderful Toyota owners! I have my beloved 01 Camry 4 cyl that's now 300,000 km and still running strong. Sadly since I live on the east coast of Canada we have on the average of 10 cm of snow 6 months a year. The rust build up is insane and now i keep getting exhaust leaks every now and then...

I chopped open the muffler on my beige Corolla. I made a short video explaining how it works: Here’s a few photos of the process: How it all works inside: Sound travels as a wave in the exhaust stream, with a wave length of...

FS (E-Bay): RARE TRD Muffler & TRD Rear Sway Bar for Gen 4/4.5 Camry & 1/1.5 Solara Available is the TRD Muffler & TRD Rear Sway Bar for Gen 4/4.5 Camry & 1/1.5 Solara. Parts are extremely rare and are some of the best additions you can make to your car! You cant beat OEM quality...

Hello everybody, my previous topic was gone I do not know why, I'm redoing it. So, I have a 2010 Camry XLE V6 3.5L Japan Spec and yesterday installed a new kit of sports mufflers, however, when the car I accelerate between 2500 rpm and 3000 rpm, a strange noise appears in the car's center panel...

Hey guys, I'm looking to replace my mufflers with something like the Magnaflow 14829. I have been trying to do as much of my own research as possible, but I have been finding mixed results. I have a 2009 V6 Camry SE. I'm certain I want the Magnaflow muffler w/tip, but I am unsure about a...