Search Results for ‘oil pump’

Hello I'm new to the blog, I have a '99 camry 2.2 114k I just did a TB waterpump job. Started It up and noticed flapping sound from TB. (Tensioner didn't fully bit up I guess) Rite before I shut the camry off to tighten up belt I noticed oil leaking from the case to the pump. Also the spaghetti...

Hello from Phoenix, everyone. I have a 2004 Tacoma 2.7 Liter, crew cab. 127000 Miles Fresh oil change on Oct 13. October 20th, traveling down the highway at 70 MPH engine started to squeak and quickly lost power. Oil light came on. Pulled off to side of highway. Checked oil. Right on the Full...

Any of you have experience with either going out as oem? am I better off with oem? someone suggests that Melling makes good oil pumps. On a side note I've got a Melling timing set coming but I've been reading some stories about folks who's melling chains broke.. anyone have something like this...

Hi guys, I have a 1993 Camry with the 2.2 L engine and I need a new oil pump. Since it's such an old car, I figured I'd get a cheap one on Carparts. The problem is, there's one with and another without the crankshaft position sensor mount. Then I go to Napa and the OEM Aisin brand doesn't...

I just noticed that R9K has released their own billet oil pump gear in collaboration with PRP, has anyone compared one of these gears to the MWR gears or another company's? It'd be interesting to see a durability or quality comparison in the future but I wouldn't mind knowing people's initial...

Does anyone know where to find the right pulley for a 1st gen Oil Pump? I ordered a new oil pump and the pulley is wrong. All the ones I see are the wrong tooth pattern, they seem to be for the next gen. This is the only picture I can find for what I need, from a rebuilt long block on ebay Here...

I have a 2004 Matrix xrs and I just snapped two of the bolts because I over tightened them. Please help!

Hello, I do have a toyota camry 2009 with around 190k miles on it. Recently I had a low engine oil pressure that I tried to fix. By removing the oil pan, I found so many debris and the pickup tube was clogged by debris. They were a lot with metal shavings in oil, other debris were of big sizes...

Doing the timing belt job and decided to change out the oil pump seals as well. The flanged hex nut on the oil pump pulley was totally seized on there (12mm) and so had a difficult time removing it. Definitely more than the 21 ft/lb that the manual calls for. Ended up rounding out and marring...

Hey All, Yes... I know, another timing belt question. I'm planning to do a timing belt on a Kentucky 4-Vin 5SFE 1997 LE I4 Camry soon. The timing belt flutter is starting to get really bad. It's also way past due for the timing belt. It's at about 180K IIRC... I guess this is also more of a...

Hello, I have a 2000 camry 4 cylinder which has been gradually leaking oil which has ~170,000 miles on it. I tried looking everywhere online to find a guide but I cant find anything for my specific issue which is why I am posting this thread. So far I have invested over 10 hours trying to fix...

Well, having the 02' Corolla, I am no stranger to oil loss (lol) But! I have had a pretty bad leak for a little while now, and I'm pretty sure I've narrowed it down to one of the gaskets associated with the Oil Pump (there is oil all over the serpentine belt wheels, alternator, AC compressor...

Hey guys, This has been happening for a while. After a lot of stop n go driving in town or after about a 45 min drive or more. when i come to a stop (usually still in gear) the oil light will flutter on. Its not constant and when i take my foot of the brake to roll forward and accelerate it...

On a recent trip I noticed some oil pooling under the passenger side. It started out as 1 quart loss for every 100 miles, and now it is up to about 1 quart to 65 miles. Here is the picture from the passenger tire. Black arrow is where it is leaking from, the green circles i tried to tighten a...

Hi, Reassembling my oil pump housing, after replacing the O ring gasket and pump shaft seal. Trouble is, there is a mark on the four 'petal' rotor that fits into the inner five 'petal' rotor, but no corresponding mark to line up on the pump itself. Does anyone have a clue where I should look...

Hello friends, Its been a while since i started a topic. Heres what i was wondering... My car is leaking problematic gobs of oil, so much so that my property management has asked me to get it fixed. I know the leak is coming from the oil pump as its been observed as coming from the pump...

Hi, So I have a relatively well taken care of '94 paseo that just hit 150k miles. It's a 5 speed w/ AC, and has lived it's entire life away from hot weather & salty roads, under a car port or garaged. It's run Mobil 1 10W-30 with Mobil 1 oil filter from 40k miles on, oil changed every 4,000...

The car would not idle after first two or three starts. However, its starting fine now. I suspect that fuel lines needed to be primed ? :cool:

I'll try to keep this as short as i can, I bought an es that had the yellow low oil pressure light on.(Oil level?) It would come on after about 3 minutes idling. The previous owner had just changed the valve cover gaskets. My plan was to check the main and rod bearings from underneath the...

About to complete a timing belt/waterpump/oil seals job on my 2000 camry 5sfe and the question i have at this point is what sort of gasket maker/sealer should i buy for the oil pump and water pump gaskets? trying to order parts today or tomorrow. i know there's the toyota brand black goop...