Toyota Nation Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. Corolla 9th Gen/1st Gen Matrix (2003-2008)
    I've just inspected my PCV valve for the first time since buying this car at 116K (now has 188k) - it looks to me it is not seated completely? This leads me to believe that this may not even be the correct type of PCV valve installed - there are two separate PCV valves for this engine, both have...
  2. Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    I recently pulled my throttle body off the car to inspect, and was pretty horrified how dirty it was. The air control valve was caked too, I can't believe it was even working. What I thought was throttle cables needing lubricant turned out to be a TB so dirty the valve was sticking. Then I came...
  3. T-100 Forum
    Nutserts/Rivnuts on passenger firewall. Bracket bent from piece of an aluminum 4 x 4 light post. I squirted a bunch of silicone sealant in the nutserts prior to threading in the bolts. Amazon sourced oil catch can mounted and plumbed. It came with 3-sets of fittings for the inlet/outlet...
  4. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    So I recently had to change out my fuel injectors and in doing so I noticed my PCV hose had a slight crack in the hose just due to age I assume. But my question is I noticed a slight leak/air sound coming from it once I started my car after installing the new injectors. I went ahead and...
  5. Corolla 9th Gen/1st Gen Matrix (2003-2008)
    I'm wanting to clean up my engine bay and been doing some research of the PCV and such. I wanting to know a few things 1. Is this 2nd hose just to allow air into the valve cover so as not to create negative pressure? if so can i replace the hose with a small breather filter? 2. If I replace...
  6. Highlander 1st Gen - Hybrid (XU20/2005-2007)
    I have a 2010 Highlander Hybrid that's on almost 300k km. It's still running great. It's the 2GR-FXE engine (V6). I'm almost certain that a recent increase in oil consumption is due to a broken PCV valve and I'd like to have a go at replacing it myself. The question is, where can I find the...
  7. Corolla 7th Generation (1993-1997)
    I have a 96 Corolla and I was trying to replace the PCV valve but I don't know if I have located it properly. Below is a picture of where I think it is (towards the bottom of the picture) where the hose connects to the valve cover and there looks like there is a leak around it and a rubber...
  8. Pre-88 Toyota Pickup/Hilux
    I looked at a couple of the other threads and I didn't seem to get my questions answered. I just bought a 32/36 weber conversion kit off ebay from Webercarbsdirect. I got the kit today and I am already seeing problems with the kit. I have a 85 22r calif. special. I know with this kit a majority...
  9. Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    Hey everyone, I am going to replace my PCV valve in my 99 camry 5s-fe. I was just wondering is there a brand that is best? All of them that I have seen are like $4-$7. What brand is OEM? Does it even matter? Thanks!
  10. 89-95 Toyota Pickup/Hilux
    Hey guys, it's been a while. Recently in the past couple of months I have been having oil drip in my driveway. Looking in the engine bay I see that the ENTIRE engine is covered in oil starting from the valve covers. When I originally got the truck the valve covers leaked a little and I replace...
1-10 of 10 Results
Top