Search Results for ‘performance’

What are the best and most cost effective functional upgrades for a V6 AWD highlander? Also why does it seem like there arent that many parts available even though it seems to have a decent powerbase with the V6 and its a very common vehicle? There are I4's with way more and lots of V6 projects...

Is there any way to get better airflow on a 1999 Toyota Corolla? I was thinking maybe a cold air intake but there's not very much aftermarket support for this car. Does anybody know of any places to get a cold air intake?

I'm looking to upgrade the front brakes on my 2010 base corolla, and while performance pads and rotors are easy enough to find, I can't find any calipers besides the basic 1-piston caliper, or a $1200-3000 big brake kit. Are there any 2-piston upgrades available and for a decent price? Drilled...

I'm starting to seriously get into performance for my 19' hatchback. I just deleted the EGR, installed a throttle body spacer, and have a 2J Racing full exhaust. Now I know with the right tune I can run bigger injectors. I also know if you "squirter more Gas, haul more ass!" So. My question...

I spent the better half of a year building and machining this fj60 2f Motor. Its been a heck of a journey. Check out the video of the install. There is a complete build series on the YouTube channel - Motor Install: Motor Assembly:

Hi, I was wondering if it's possible to swap out the E351 transmission from the matrix and swap it for the E350 that was in the 2005-2010 Scion tC? I'm wanting the lower final drive that came in the Scion transmission. If it's not an easy swap then maybe the diffs are interchangeable? Any help...

Hi new to the site. I have a 2010 Matrix with the 2ZR-FE and 5 speed. The 5 speed is on its last legs and rather than replacing it with the same, I'm hoping to swap a 6 speed into it for some added performance. I just wanted to see what all is needed to do the swap so that I can get a parts list...

I'm planning on reprogramming my ECU and adding a performance chip. Chip claims to give better shifting and mpg. Anybody actually tried a performance chip? The outfit is performancechipsnow.com

Has anybody installed an EPAS controller to tighten up their steering on their 10th gen? I haven't found anything helpful in my google exploration. I DID manage to find one for 05-11 Yaris EPAS, I would imagine it's similar, if not the same unit. Can anybody verify this for me? Or point me in...

Hello. I am new to this forum and new to the world of Toyota's in general. In about a month or 2 I will be buying a 1996 Toyota Tercel from my brother and I had a few questions. The car has a small motor oil leak and I was wondering if I should fix that and build the motor it currently has...

So I've seen on some of the Civic, Miata, and other car forums that removing the sway bar can reduce understeer and increase oversteer, but at the cost of body roll. I mostly notice understeer on corner exit, which is where I push the car hardest, and the inside wheel likes to spin if you're not...

My friend has an 85 tercel and really wants power and I cannot find an 85 performance cam but I can find 89-91 cams available. So can I put an 89-91 performance cam in the 1985 3a 60ish horsepower engine

has any tried any performance up grades for the brakes. I don't have the TRD option. After spirited driving the rear brakes will thump. Once cool they act normal. So what has been tried ? what results? Thanks

I want people to share ideas on how to make the Highlander faster. The 2019 Highlander comes with 295 hp. I know with a few parts the car could produce more HP. I have tried to find performance parts to put in the Highlander but could not find anything useful.

Yo, so you guys proved to be first responders. Means I'm settling here for now. So, to get on with what I want out of my car. ((For the most part, at the end of each paragraph will be something in parenthesis like this explaining what I've found so far. Feel free to confirm or correct me...

Okay so I have a 1990 Toyota Camry LE, it's the 2.0L 4cyl automatic. I saw it on the side of the road for sale with a hefty amount of rust all over it's beautiful blocky figure. She seems to run well and I am almost finished working on the body, along with a few minor fixes that I needed to do...

Selling a MKC Stainless Steel Y-Pipe for the 2GR-FE. More information on this pipe on https://www.facebook.com/commerce/products/1029827553741356/"]MKC's FB post and on TN forums: * Installed on a 4th-gen Avalon * Installed on a 7th-gen Camry * ZARCOR's 7th-gen Camry This pipe has been...

1996 Camry LE with 1MZ FE. 180,00 miles Maintenance to Date: Replaced all lifter buckets to fix loud valve train: It worked perfectly! replaced cracked hoses, including air intake hose between throttle body and MAF Cleaned TB, IAC with penetrating oil (Seafoam DeepCreep) Periodically use...

Hello everyone! Recently bought a used 2013 Camry SE with the 2.5 I4 engine from a family member for a good price, leaving me some extra funds for modifications. I have around $2,500 remaining after the purchase, and the car currently has 40,000 miles (planning to own the car for the rest of...

Hi all, I got an 05 Corolla with about 149K kilometers on it. I've been living with these problems for a few months, but I thought it was time to get this figured out once and for all. I'm perplexed about this problem. My first issue is that my car will idle roughly when at a dead stop in gear...