Search Results for ‘removal’

Joined just to make this post, hope it can be helpful to others dealing with the "Bolt from the butthole of Satan himself". I used a method I was unable to find online, or from anyone else to remove the camshaft bolt with minimal tools. TLDR: 1. Buy this cheapo camshaft holder from amazon for...

Good afternoon fellow Highlander Owners. My name is Ramón, and I drive a 2020 XLE Hybrid. I want to do some car camping this summer and am considering removing all rear seating so as to maximize space. My plan is to create a new bed "floor" as low as possible. I have not been able to find any...

Hi T Nation (previous post in the wrong location) I’ve had my 2015 highlander for the last 6months and have been slowly adding a few mods for a better look. My latest mod being plasti dip on all things chrome. The grille has been one of the hardest parts to work on as there is not a lot of...

Hi all, Phil here from Nz. I’ve had my 2015 highlander for the last 6months and have been slowly adding a few mods for a better look. My latest mod being plasti dip on all things chrome. The grille has been one of the hardest parts to work on as there is not a lot of information out the to...

Hello all, The 3rd, downstream sensor decided to call it quits, and having replaced the 2 up-streams, here I go again! :devilish: Yes, I did a search on seat removal, see the 4 bolts, but between searching here and Haynes, there are warnings about the airbag and disabling it, but not how to...

I ordered this ambient light kit off of AliExpress: https://www.aliexpress.com/item/4001201589529.html?spm=a2g0s.9042311.0.0.43d44c4d1GzdTj And the way it works is by replacing the stock chrome trim on the door panel. Has anyone ever replaced this chrome trim or have any idea on how to go...

hi all, since i've been seeing a lot of post about this topic with no real instructions on how it's done i decided to take a shot at it. attached is the first draft. i take no responsibility for any damages that you might do to your car while doing this. hope this helps. update: forgot to...

My sister bought a used Toyota Avalon that had some heater problems. Flushing the heater core didn’t help, so I continued troubleshooting the problem. Apart from low heat coming out of the vents, I also noticed that the windows fogged up more than usual. Googling the symptoms led to a few sites...

Will a 2007 Camry Se rear bumper cover fit on a 2010 Camry hybrid?

So I'm currently in the process of sound deadening my car and so far I've done the doors, trunk, and hood. Next, I was going to do the floors but have it professionally done due to it seeming to be more difficult than the doors or the trunk. But looking at videos of people removing the seats and...

I swapped the interior on my Toyota Camry from that boring gray cloth to some much nicer black leather. Yes, this includes the dashboard. While swapping a dashboard might sound daunting, I made a short video detailing the process….it’s quite easy: Here are a few tips on removing the dash...

This my first time removing an engine from a car. It was an amazing learning experience, and I did (most) of it myself! I documented some of the major steps in the video below: The engine and transmission were removed from my 2001 Toyota Corolla. I opted to disassemble major components off of...

hello, all. I'm new here sorry if I'm breaking any forum rules. I was looking for a tutorial or a similar thread but couldn't find any. I have a 2009 corolla and the dash is all sticky and shiny :( I want to purchase faux leather vinyl and glue it on the dash for recovery. in order to do so, i...

The seat belt on my 2004 Camry keeps folding under and jamming at the retractor opening. This has been happening for a couple of years. Up 'til now I've been able to straighten and unjam it. To do this I have to pull out belt while twisting it, and I kept saying some day I'll run to the end...

I'd like to temporarily loosen most of my 2001 (Gen 4) Camry's front fender liner (driver's side). At the lower rear of the liner, 3 plastic screws hold it to the door panel. I've removed those, but under them are what look like thin, clear plastic washers under the screw heads, and on the...

Currently in process of removing the SRS airbag system from a 97 Corolla DX 1.6L Auto. Ive got the battery out, Wire connections unplugged to both the airbag and the sensor under center console. Im at the step of loosening the Torx screws until they catch on the screw casing. Theoretically I...

Made myself an electrolysis tank, first thing I'm gonna try is rust removal on the coils. I did clean them up with the wire wheel first there was some tar and other crud on them. So how long do I leave them in for?

Hey guys, This is my first post on the forum so I wanted to make it a post to help others out. Here is how to remove a door panel on a 2001-2005 Toyota RAV4 and fix the common door lock problem. Let me know what you think! https://www.youtube.com/watch?v=-VbbJqg7CH0

Well, nobody else on the internet posted a how-to on how to remove the front bumper/fender on the MKI MR2, so I will be the first. !! Read first !! You will need: 10mm wrench. (A ratchet works wonders) Phillips screwdriver. Ziploc bags (to mark which bolts/screws are which) Lug wrench. Car...

So I have the center console apart trying to get access to remove the 12v power outlet, and I have it all apart but I can't for the life of me figure out how the power outlet comes out of its mount. Does it slide out of the top, or come down through the bottom? How? Thanks! Yeah, I plan on...