Toyota Nation Forum banner
repair
1-20 of 93 Results
  1. Corolla 9th Gen/1st Gen Matrix (2003-2008)
    Hi all, first time posting here looking for advice! I have a real head scratcher. I have replaced the transmission on my 2007 matrix xr (man. 5 speed) with a tranny from the junk yard from a 2008 corolla. Everything has gone back together totally fine and I was about to celebrate when I got...
  2. Introduce Yourself Here
    Hello, I'm Julie. Below are images of the current topper lock on my Taco. I am looking for something to replace it with as it is rusted and there are no keys to lock it. I know I can simply get a replacement handle with new keys but I would like to replace the entire assembly. The problem is I...
  3. Camry 7th Generation (2012-2017)
    I’m having to replace my driver side seat cushion shield. This part is called "Genuine Toyota 71812-06200-C0 Seat Cushion Shield" or "OUTER FINISH PANEL - TOYOTA (71812-06200-C0)", the part number for my 2014.5 Camry is 71812-06200-C0 I’ve looked at a number of repair manuals and none of them...
  4. Tundra 1st Generation (2000–2006)
    I just purchased a used Tundra a couple months back, has 167,000 miles on it, and was wondering if anyone has any tips on anything I might need to repair/replace. Since my purchase I have: Replaced the radiator and hoses Changed Oil Done brakes, front and back(including rotors and drums)...
  5. Camry 8th Generation (2018+)
    I have a 2020 Toyota Camry TRD and the Normal and Sport drive mode buttons seem to be sticking when pressed. I suspect some sort of spilled liquid but I want to confirm. Does anyone know how to remove the drive mode buttons? I was hoping you might be able to pull up on them (carefully) with a...
  6. Camry 6th Gen - Hybrid (2007-2011)
    We stopped driving it and the hybrid battery died before we could put fuel stabilizer into the engine. It's been a driveway brick for 14 months. What do we need to get it running again? I'm assuming some amount of engine and fuel tank cleaning, and a new hybrid and 12V battery. Anything else...
  7. Corolla 9th Gen/1st Gen Matrix (2003-2008)
    Call me stupid, I decided to delete my muffler on my 07 Corolla. It sounded cool for the first couple days. I’m now tired of the loss of power at take off and at low rpms. A car load of people feels like I’m driving around a peel p50 (slow). Anyways, I got it done at a local shop. They cut the...
  8. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    Novice repair person here, and I replaced my valve cover gasket at home. Now I hear a weird knocking noise and I'm certain it wasn't there before. Video with sound. Any help is appreciated, not sure if I should even drive the car.
  9. Corolla 11th Gen Sedan 2014-19, Scion iM 2016-18
    Have a 2018 Corolla LE. All hwy miles in Florida weather, no snow and no floods, never wrecked or damaged, but now have an outer axle/hub bearing assembly on the left front that has gone bad. 3rd party Toyota /Lexus repair shop with over 30 years experience stated that they also just replaced a...
  10. Avalon 2nd Generation (2000-2004)
    I own a 2001 Avalon XLS and I am having a hard time diagnosing an issue with my vehicle. It runs rough in idle and sputters while driving under 40ish. When I scanned it I got code P1349. I think it may be a VVT solenoid because those are common issues but I'm unsure. Any ideas?
  11. Corolla 9th Gen/1st Gen Matrix (2003-2008)
    Hey guys, recently changed my trans to a 6 speed and now I'm getting a check engine light on the dash. I figured it might have to do with my gas tank shutting the pump off before it's filled. I looked into it a while back and it mentioned I'd need to blow my EVAC line or something along the...
  12. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    2003 camry LE 2.4 I have a few deep scratches on my front and rear bumper. Would I be able to fix the scratches with Bondo Glazing putty? Or do I need bondo body filler?
  13. Corolla Older Generations (1969-1987)
    My friend Matt and I both bought 1985 Toyotas, his is Celica and mine is a Corolla SR5. We have had the cars for a while but they were waiting for our other project cars to be completed. The '85s are now in our garages and we are filming everything for YouTube. If you're interested in these '80s...
  14. Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    I plan to 'drop' the gas tank. It's recommended to use a transmission jack but I'm hoping I can handle it without one. How much does the gas tank weigh ? I think it's made of plastic so it shouldn't be much if it's close to empty.
  15. Scion xA Forum
    Can someone help me interpret and possibly point me in the right direction for repairs? Thanks.
  16. 4Runner 2nd Generation (1990-1995)
    Hello. I have been looking at getting an older 4 runner. I found an add for a 1994 4runner. It has the V6 3.0 EFI, and little over 200,000 miles on it. The car is being sold at quite a low price, and is in decent (cosmetic) condition. The add mentions it has a blown head gasket. I was curious...
  17. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    Hey all, I have a 2009 Toyota Camry XLE with the V6 (2GR-FE) engine, and recently I've started hearing chirping noises coming from the belt system on the right side of the engine. I can't figure out what it is exactly, but here is a video of the sound I'm talking about: New video by Zareef Huq I...
  18. 4Runner 3rd Generation (1996-2002)
    Alright, this is gonna be a doozy. I'm not much of a car guy and there are so many issues that I'm having to post a whole discussion. My 2001 SR5 4Runner @280xx miles is needing a lot of TLC and need advice. Can I repair it? If I do will the repair outweigh the actual value of the vehicle? Here...
  19. Camry 7th Gen - Hybrid (2012-2017)
    Hi Everyone! I recently replaced the front strut assemblies and sway bar links on my 2013 Camry Hybrid XLE and about 2 weeks later there is now a slight clunking noise coming fron the front suspension. The strut assemblies and sway bar links were OEM parts and matched the old parts. The noise...
  20. Venza Gen1 (2009-2016)
    I have a 2009 V6 Venza that I just got back from my ex wife and it has a problem. She had the alternator replaced by a friends nephew who apparently caused a total electrical system failure. They ended up replacing the fuse panel or box, she was not sure which. Now the push button start is now...
1-20 of 93 Results
Top