Toyota Nation Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Corolla 10th Gen/2nd Gen Matrix (2009-2013)
    Was about to replace my front rotors, which are about 21.90 mm because I read somewhere that they should be 26 mm minimum thickness. Just opened up the box for the new rotors and they are 22.01 mm. So... something is wrong. Either the parts I was sent, or the 26 mm spec. Does anyone know...
  2. Corolla 7th Generation (1993-1997)
    Hey! I recently bought this '93 Corolla to be my first project car, but unfortunately the owners manual has gotten lost over the years. It wouldn't be a problem since I found plenty of info online, but I get conflicting specs! Examples: I've gotten 3 different oil capacites (w/ filter) for the...
  3. Avalon 1st Generation (1995-1999)
    Well, to quote another source Mr. Haynes is not the most reliable of sources. I find some of the specifications for the crankshaft are different than posted on other sites. I'm looking for the correct Specifications for a 95' 1 MZ FE. Hopefully there are some charts online that are not part...
  4. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    Hi, and thanks in advance for any and all help! I am currently trying to replace the flex pipe on my 2002 Camry, 4 Cylinder Engine, as it has a major exhaust leak. I've been doing my research and found out (mainly from this forum) that it's a lot cheaper to buy a flex pipe and have it welded in...
  5. Highlander 1st Generation (2001-2007)
    I have a 2003 V6 AWD Highlander. I am thinking of converting it to european specs as I'll be living in Europe next year. Does anyone know all that is required to convert the car to european specifications?
1-5 of 5 Results