Toyota Nation Forum banner
1-20 of 133 Results
  1. Highlander 1st Generation (2001-2007)
    Hello, new here, I have a 2004 base highlander 4cyl fwd. I have shot a rod and need to replace the engine, but I was hoping to be able to upgrade the engine to a V6. My issue is I don’t know what/if other engines would fit in my car. I realize that if I do change the engine I would also probably...
  2. Tercel, Paseo, Starlet, and Sera Forum
    Engine just started knocking badly on this car and I am having trouble finding a replacement that will ship to Canada. Would it be worthwhile to have someone rebuild it? or is there another engine I can swap in that would be easier to source? Love this car and want to see her back on the road.
  3. Corolla 8th Generation (1998-2002)
    Hi guys. I am in the process of preparing the SWAP. I am looking for pictures of the loom connectors with pin diagrams like the one linked below. Can you help? My concern is that the 4 glanza fuse box engine bay loom connectors that get into the cabin match the Corolla female connectors. I have...
  4. Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    Tried to find which tranny will work with a 1mz 99 solara. U151e i believe is the 2.2L I4 tranny. It is an auto now (A541e) i wanna do a swap. I would like to rebuild it with atleast a stage 1-2 clutch set and lighter flywheel. Any info is greatly appreciated. Ps. Please dont tell me to sell it...
  5. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    My 03 camry's 2.4 litre bit the dust recently and I've been looking for an engine to swap into it. Most important thing though is that i would like to be able to supercharge said engine. I've been looking into the gm ls engines and the v6s of the newer camrys but im up for suggestions. Even if i...
  6. Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    00 Solara to a 06 Solara. Both xle. Will it work?
  7. Pre-88 Toyota Pickup/Hilux
    I have a 1990 Toyota Hilux RHD Solid Front Axle and am looking to swap my tie rod bar 1.25" & tie rod ends to toyota FJ80. Does anyone know if this can be done with a straight swap? Both are straight tie rod bars, but I would have to add a bracket for the steering damper as the tie rod ends...
  8. Corolla 6th Generation (1988-1992)
    Hi guys, So I have an 1990 AE92 Corolla with the 4A-F carbed engine and auto transmission.(90k miles) To be honest the auto feature sucks and dealing with carbs is a pain. I have found a 1994 AE101 donor car that has the 4A-FE fuel injected engine and manual transmission.(30k miles) Will it...
  9. Pre-88 Toyota Pickup/Hilux
    I have a 84 22re 2wd that’s runs like a top every time, but frame is cranked been jumped one To many times in the the winter salt wonderland and I was wondering. If I had got a a 1989 4wd 22r with efi fuse issues could I take the 22re and swap with the 22r not have bolt up issues or wiring...
  10. Yaris/Scion iA, Vitz and Echo Forum
    So I was wondering is a gearbox from a 2szfe fits to a 1szfe. Am curious to this as i know that a diahatsu terios some of them use the 2szfe engine, but I can get a 1szfe very handy to put it in, but I dont know if the transmission areas are the same?
  11. Tercel, Paseo, Starlet, and Sera Forum
    I am thinking of doing a 4efte swap into my 1998 Tercel, which had been said to be a direct bolt-on. I am wondering exactly what is needed to make the swap possible. This is my first time attempting a swap so I am unsure what I need specifically, and if anyone that has attempted this can give a...
  12. Tercel, Paseo, Starlet, and Sera Forum
    I'm doing a 3ee to 5efe swap on my 92 tercel, the motor/trans combo came from a 97 tercel. I thought it would be a simple swap everything is bolted up and ready to go but I have no idea about 5efe engine harness into the stock 3ee chassis harness fusebox and the engine harness going into the...
  13. Camry 8th Generation (2018+)
    The new TRD is simply the sickest dad car I feel many of us have seen, all is said and good with the beaut besides 1 thing imo, the FWD drivetrain. How would you go about swapping in an AWD drivetrain from a lower trim model, if possible? and what years would it be possible with?
  14. Camry 7th Generation (2012-2017)
    Anyone ever attempt or know what will be needed to swap the v6 into a 2012 le or if the engine will fit in the engine bay.
  15. General Discussion Forum
    Between Toyota’s & lexus’s Which ones came with that specific engine In years & last year of that engine & which cars? & the difference between the US&japanese gte?which one stronger?
  16. Yaris/Scion iA, Vitz and Echo Forum
    Does it work if i install a 1.5cvt engine-control On a 1.3auto4gear engine?
  17. Camry 8th Generation (2018+)
    Hello im wondering If Its possible to replace a 2018 Camry LE Rear Bumper with a 2018 Camry SE Rear Bumper? Are the dimensions the same along side with nuts/bolts the holds them in place. I have an LE but i like the look of the SE Rear bumper more, and I will say I like the LE front bumper more...
  18. Corolla 6th Generation (1988-1992)
    Im planning to swap my 2E to a 2EE. What are the main differences other than the fuel injection method? Does the carburated 2E gasket kit fit the 2EE? (obviously without the gaskets for the efi stuff)
  19. Camry 1st and 2nd Gen (1983-86) and (1987-91)
    hey guys im sorry i keep asking questions but i havent gotten a clear answer on this one. i have a 1990 camry i dont know what engine it has but its a DX model. i want to know what engine would be a direct bolt up if i needed to swap. second question is what engine do i most likely have and do u...
  20. Corolla 6th Generation (1988-1992)
    I plan to swap my 4AF to a 4AGE. I know I will need 4AFE or 4AGE fuel lines, fuel pump, fuel filter. My main concerns are the wiring and the exhaust. Can someone who has done it give me some advise/tips?
1-20 of 133 Results