Toyota Nation Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Camry 8th Generation (2018+)
    I recently purchased an auto-dimming rearview mirror but unfortunately, I'm having trouble figuring out how to give it power. Does anyone know what wires I should be taping into in order to power it?
  2. Corolla 6th Generation (1988-1992)
    I'm sorry in advanced, this is going to be long... Backstory: I created this account for this issue alone and believe me, I have been lurking around this forum seeking a similar thread for about 6 months since I got the 1989 Toyota Corolla (4AF) at the beginning of this year and although this...
  3. Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    Hello, new to the forum. I have read threads about replacing rear sway bar bushings and the concept is very simple. However the reality is not so simple because the bolts holding the bushing bracket on has corroded and cannot be removed. I used plenty of PB Blaster but the bolt broke. I can...
  4. Corolla 7th Generation (1993-1997)
    This may not be a common problem, but here it is... I am at the point of re-bolting the front suspension cross-member to the frame (after replacing the steering rack). There are 4 major bolts (2 on each end). 3 go in just fine. 1 will only go in partially and then gets super tight. I know...
  5. Corolla 7th Generation (1993-1997)
    To make a long story short, i was reinstalling the crossmember and i ended up somehow messing up the threads on two of the four main bolts, as well as the threading that the bolts screw into. i don't think they're stripped, they probably just need to be chased (is that what you call it?)...
  6. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    Hi everyone, I thought you might be interested in this as I know there are many others out there with this same major engine issue.
1-6 of 6 Results