Toyota Nation Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Corolla 9th Gen/1st Gen Matrix (2003-2008)
    After stripping the tensioner bolt on my 2006 Corolla, I looked around and I could not find any answers that did not require to replace the entire assembly, and so I came up with my own. If you strip your tensioner bolt, you can manually depress the tensioner using a jack and a piece of wood...
  2. Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    So I'm changing the water pump off my 99 Camry, over heating and this was diagnosed as the issue. When I get the harmonic balancer, the bolt was on there pretty good. Had to buy ridgid 1/2 impact wrench to get that sucker off. In the process, my cam and balancer markers got unaligned. How would...
  3. Avalon 3rd Generation (2005-2012)
    Hi there! Do my water pump has gone the way of the dodo. Since I will be in there anyway, I want to replace the tensioner and idler pulleys, but there is no tensioner pulley available for sale. You have to buy the whole assembly over $200???? Does anyone know where I can get the tensioner...
  4. Camry 3rd and 4th Gen '92-'01, Solara '99-'03
    Hello all, So I've just replaced a busted timing belt on my 4cyl. Solara, and everything works great, but I've had a nagging worry ever since. All of the videos and specs clearly indicate that the tensioner and idler pulleys need to be tightened to 31 ft lbs. My torque wrench only goes up to...
  5. Camry 5th and 6th Gen '02-'11, Solara '04-'08
    2003 I4 - replacement serpentine belt idler pulley (tensioner pulley) - Febest Hi everyone. I notice a 2AZFE serpentine belt system rattle when outside the car (135K mls) while it's idling, and slipped the belt off to confirm it's the tensioner pulley bearing (it rattles when I spin it by...
1-5 of 5 Results
Top