Search Results for ‘wheel bearing’

RESOLVED -Was just able to pull it off. Too tired to figure out how to delete a post. If you wanna submit useful strategies for a future time or someone else, be my guest.... 2006 Toyota Corolla with 200k miles A wheel bearing is going bad on front passenger wheel, and I'm replacing the...

Hi All, New to this forum–sorry in advance if I'm slow on the pickup! My '92 Alltrac has a bad wheel bearing, so I ordered an OEM part and found a nearby machine shop that's willing to remove/replace. I expect, given the awful sound coming from the rear end, that the hub assembly won't hold a...

Simple question, if my car does NOT have ABS will the rear wheel bearing/hub setup from an ABS car fit correctly? I think yes but want to be sure. Obviously the opposite wouldn't work (non ABS on ABS car).

Hi all, I'm new. Owner of a 2008 Corolla that is my son's college car, bought from a family friend and well maintained. We love that car (and Corollas) and REALLY want this car to work for a while! The short question is my question in the subject. The long details are below: The problem is...

Hello everyone, I need to replace the front wheel bearings on my 2000. Should I buy the wheel bearing and hub unit or just the wheel bearing? Also, which manufacturer from Rock Auto? Here are the ones listed: RAYBESTOS TIMKEN MOOG (I thought they made synthesizers) BCA CENTRIC Thanks!!

2001 Echo Base model sedan. My dad has a press at work, he doesn't use it he had to get his buddy to get it. so i got my new bearing pressed in. I got the knuckle back on the car before i read the hub has to be pressed too and my dads buddy is on vacation now. Can i put the slide hammer back on...

So my steed has a bad wheel bearing. As I have enjoyed the zen of 9th gen mechanics and DIY repair, I am undertaking most of the wheel bearing replacement (shop will dot the pressing). I ordered Timken bearings from RockAuto. They arrived today. The RockAuto magnet went on the fridge and the...

Hi all, New to forums, been looking around unsuccessfully for some info on what torque the adjuster nut needs to be set up to on an 05 hiace KDH200R with the 2KD-FTV Engine. Any help or a point in the right direction Vary much approached in advance, Cheers.

Hello - I'm trying to replace the front wheel bearings on my 2007 Sequoia and I can't get the darn lock nut off of the axle hub. I have the SST but I'm not sure which way to turn. My 4' leverage bar isn't moving it. Just making sure that it is counter-clockwise to remove? I knew at 200 ft lbs...

Howdy, So I got some rear wheel bearings with the hub from Timken, but the holes for the lug studs are smaller than OEM and I have to use longer-than-OEM lug studs (long story) Anyway, I figure the surefire way to do this is just to buy the bearing module separate and then slap the OEM hub on...

Well. I've read several posts on this forum about front wheel bearings. I'm not looking forward to this. Any suggestions? I'm looking at buying the Timken bearing. Currently not planning on replacing the dust shield or any other component related to the disassembly/reassembly. Planning on...

Greetings from Maine, I have a 2000 Corolla LE *WITH ABS* and 275k on the odo. The car is in need of front wheel bearings. All of the listings that I am seeing say NON ABS or Except ABS or Without ABS, etc... Can someone show me a listing for bearings / hubs that fit a Corolla WITH ABS...

I have a 2012 SE V6 with 113,xxx miles. I've had a droning noise that seems to have gotten progressively worse over the last year or so. I thought it was the Michelin tires that were nearing replacement. I had a new set of Michelins put on a couple weeks ago which seemed to improve it some...

Hello All! This is LONG, so I apologize. Hopefully you won't have questions though. I have a 09 Rav4 w/ V6 and 100k miles, about 80% highway miles. Quick question then explanation. Is it possible for a shop to damage the cv boot while replacing the wheel bearing??? So I had my front left...

I need step by step directions on how to put my drivers side front wheel bearing hub assembly back together. I paid someone to take it apart and put it back together, but now that it's apart, the guy is gone and I need to put it back together myself. I got the old wheel bearing pressed out and...

I'm having an issue with my wife's 2008 Camry. We're feeling vibration at highway speeds. Feels like it's coming from the front passenger side. We've had all 4 tires replaced (two of them replaced twice because we got lucky and the shop gave us a set of 4 for free with all the trouble we were...

Hey Everyone! New member here so hopefully I'm posting this in the right area. I have a 96 Corolla DX with 190k on the clock. I hear a strange wobble sound coming from what I believe is the front drivers side wheel, although I'm not positive its the drivers side. I'm starting to run out of...

I've been trying to figure out whats wrong with the wheel for about a week now. There is an audible clunking sound coming from the front right wheel. I can hear it a speeds up to maybe 15 to 20 mph then it fades out probably from road noise. I think I narrowed it down to a bad wheel bearing, tie...

Hi, I bought a used 2003 Toyota Cororlla LE from a delaer. There is a humming noise from the rear wheel (or wheels) that goes up after ~50mph. The dealer salesman said its tire (not sure how much the salesman knows abt the mechanical things). The rear tires are bad as I can see, the threads are...