[dchap110]

hi. im putting in a timing kit and do i line my sprocket marks{crankshaft and camshft] STRAIGHT UP AND DOWN WITH EACH OTHER? IF ANYONE COULD SEND ME A DIAGRAM OF THIS AT [email protected] IT WOULD BE VERY HELPFUL TO ME. THANKS

 

[fourwd1]

Before you do anything you MUST make sure cyl #1 is at TDC, and marks on the sprockets will be correct.

Also, make a reference mark on the distrib to line up the rotor poition, to ensure you get the distrib back in right.

A service manual would probably be a great help to you also.

 

[qsd-dan]

This site should answer your questions

http://www.4crawler.com/4x4/CheapTricks/EngineMods/TimingChain.shtml