Toyota Nation Forum banner
1 - 12 of 12 Posts

· Pochacco Owns Me
Joined
·
3,095 Posts
you mean the guage cluster ? they take 194/168 bulbs....led might not work since they tend to be spotty instead of spreading out like regular bulbs.
 

· Registered
Joined
·
49 Posts
Discussion Starter · #5 ·
I found LEDs specifically for in car dashes. The bulbs for my car had a grey socket on them that twists into behind the gauges. I was wondering if I would need sockets for the LEDs or if the old bulbs are removeable from the sockets so I can reuse them.
 

· Pochacco Owns Me
Joined
·
3,095 Posts
well i know for a fact that my bulbs are stuck into a holder and you can remove it to replace the bulb... but i also heard from some other people in the other thread that they couldn't remove the bulb and it was 1 piece.. so might want to check yours first.
 

· Registered
Joined
·
3,126 Posts
The bulb for spedo/ tach illumination is 168 with green transparent pvc "finger cot" on it You may use the stock 168 light bulb but you can paint it green same way as X-mas tree lights.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top