Toyota Nation Forum banner
1 - 3 of 3 Posts

· Registered
12 Posts
Discussion Starter · #1 ·
Question about the camshaft gear (in somewhat related to this forum but this forum didn't answer to my camshaft gear issue itself, figure I make a new topic on it -

How do I align/fix the camshaft gear (not PULLEY)? I had to replace the head gasket and few other gasket in the region. Now putting back the intake and exhaust camshaft gear and the manual was NOT clear (nor was the web) on which timing mark it SHOULD be aligned with?

the exhaust has a double dimple mark and 2 single (45 degree apart)
the intake has 1 simple and 2 dimple (45 degree apart)

which one of those should be matched/aligned. does it face toward each other or the opposite end of each other?

this is what I have at the moment:

Thanks in advance for assistance!

· Administrator
14,720 Posts
  • Like
Reactions: dvinsky
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.