Toyota Nation Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1 (Edited)
Hello, I'm helping a friend put a head gasket on his wife's 1997 Toyota Corolla 1.6L automatic. We removed the cam gear and failed to notice that there were two ways that it could go on. There are two slots on the gear that the pin on the cam could go into. One slot is marked with an "A", the other one with an "K". Can anyone tell me what the difference is & how we can be sure that we have it on correctly? Thanks in advance. Zeb
 

·
Registered
Joined
·
212 Posts
I can't answer your ? But when this happens to me, I look for the hole or keyway that is clean verses dirty. One should have been covered, the other should have been exposed...hope this helps...
 
1 - 2 of 2 Posts
Top