Toyota Nation Forum banner

1 - 20 of 42 Posts

·
Registered
Joined
·
1,177 Posts
Discussion Starter #1
i have a few matching pair of LS430 projectors, some with good shroud, some were cracked.

here are the picture to show the progress

please excuse my work, it is not a finish product yet, still test fitting, a lot of dust.

























 

·
It's Soo Hoo like Yoo Hoo
Joined
·
3,220 Posts
looks great man! cant wait to see your cutoff and beam width! a guy on here named haknslash(also on hidplanet) did a ls430 retro on his highlander and it looks amazing!
 

·
Registered
Joined
·
8,415 Posts
Hmm... I can see Mr. Punks is drooling all over it already! :D
 

·
Registered
Joined
·
1,177 Posts
Discussion Starter #6
only working on passenger side right now, hopefully will finish the driver side soon,
i already test fit the passenger side headlight on the car to make sure it is level, and i noticed the beam is very wide, not much glare, too exicted and i forgot to take a picture of the wall shot.
 

·
Registered
Joined
·
1,177 Posts
Discussion Starter #15 (Edited)
i can't find a dark wall wide enough to show all width,
the previous wall shot is about 2 to 3 car length from wall,
the wall is roughly 80 to 100 ft wide to my estimate.

most shopping mall or parking lot has night lights. this is the darkest one i found.
 

·
Registered
Joined
·
1,177 Posts
Discussion Starter #17
i guess i don't know how to use the camera, or take good picture, it is wider, but width not showing up on the picture.
















i feel like i wasted $43 for the aftermarket foglight that i installed a week ago, I can't see the difference when i turn the foglight ON and OFF. i guess it is only good to fill the one missing foglight cover that i have.
 

·
must.resist.modding
'09 Camry SE V6
Joined
·
5,234 Posts
holy crap. I'ma bout to swap out my gen 6 headlights for gen 5s with retros :)
Why not just retrofit your Gen 6?
i guess i don't know how to use the camera, or take good picture, it is wider, but width not showing up on the picture.
















i feel like i wasted $43 for the aftermarket foglight that i installed a week ago, I can't see the difference when i turn the foglight ON and OFF. i guess it is only good to fill the one missing foglight cover that i have.
No long alley or anything? Best to get the width is to be far away from your car
 
1 - 20 of 42 Posts
Top