Toyota Nation Forum banner

2008 Sienna Oil and Filter

12K views 2 replies 2 participants last post by  Jaketab 
#1 ·
My 2008 Sienna is due for the 1st oil change. Could someone tell me where the oil filter is located on this vehicle? There is a cannister on the front side of the engine just below the exhaust manifold. Is that the filter housing?

I would also like to hear from others if they have been using synthetic oil and how it is preforming.

Thanks - Jaketab
 
#2 ·
You are looking at the filter housing. You need to get the filter element from the dealer, it will come with the o rings and a fitting to drain the filter.

use a 3/8" drive to remove the filter drain cover, drain it. Next, use a 65mm 14 Flute filter wrench to take the filter out.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top