Toyota Nation Forum banner
1 - 20 of 33 Posts

· Registered
Joined
·
158 Posts
Discussion Starter · #1 ·
I need a 2010 Toyota Matrix (Grey) front driver side fender.
I am in the Central NJ area.

See thread:
 

· Registered
Joined
·
158 Posts
Discussion Starter · #3 ·
So here's the picture of the tire replacement, before and after:

BEFORE:

298105


298106



AFTER:




298107


298108



298109



NOW on the other side, I lost my windshield wiper fluid reservoir. And I also ripped some wires, and my passenger head light does not work, nor do my DRL lights work. Does anyone have a wiring diagram for the wiring around the windshield wiper fluid reservoir ?


298110



298111



298112


298113


298114



Now I think the green and brown wires are for the left speed sensor. But in the bundle of white wires, one is ripped with bare copper exposed. There is a pink, orange, and blue wire exposed and I don't know where they connect to.

I also need a new wiper fluid reservoir. When I try to pump, I don't think I even hear the pump running.

But I need to fix these wires soon because my front passenger headlight and fog lights may be out.

My front wipers work, but the rear wiper won't move.
 

· Registered
Joined
·
158 Posts
Discussion Starter · #4 ·

· Registered
Joined
·
158 Posts
Discussion Starter · #5 · (Edited)
Worth a phone call or a look, $50 bucks and 50 miles from Newark.
GREY,4 DR,LX T39715
009364
$50​
Bi County Auto & Truck Salvage USA-NY(Bay-Shore) Request_Quote 631-968-5700 Request_Insurance_Quote

They are 50 miles in Long Island. With the tolls and heavy traffic, I might not want to pick it up from this shop. 50 miles in NY (one way) could take me all day. I asked them if they ship fenders via UPS, but they won't do it for sheet metal fenders :(

Also, NY is the state with the highest amount of Covid infections & Deaths in the United States. May those who died of Covid Rest in Peace.
 

· Super Moderator
1995 T100 2WD & 1993 MR2
Joined
·
19,822 Posts
Not that I'm aware of!
Watch some YouTube videos before you give it a try. If it's not a complex area with multiple curves and edges it's pretty straight forward. Can't be a thick repair, panel would have to be pulled out first. Then probably be better off painting the entire panel because blending is a bitch especially with a rattle can.
 

· Super Moderator
1995 T100 2WD & 1993 MR2
Joined
·
19,822 Posts
I saw grey doors for around $100-$200. I can't justify dropping that much money into a car that's 10 years old. And changing out a driver side door is not fun.
Swapping out a door is not that difficult, fewer bolts than the fender and good chance fewer electrical connections to worry about. In the big scheme of things a 10 year old car is not that old. I guess you could band-aide it together and then go with a lease or payments for 6 or more years.
I'd rather fix what I have for a couple hundred bucks once in awhile and some of my time than take on that kind of long term finacial obligation.
What ever works for you.
 

· Registered
Joined
·
158 Posts
Discussion Starter · #14 ·
Well I found out I slammed my car so hard that the headlight filament bulb wires snapped. I took out a 9006 headlight that wasn't turning on and a spring was rolling around inside the bulb! Also, the same thing happened to my H11 Fog Lights. Took out the one that wasn't powering on, and the filament wire snapped. I saw a spring detached from the rest of the wires.
I just replaced these bulbs last December o f 2019!
 

· Registered
Joined
·
158 Posts
Discussion Starter · #18 ·
Found a Grey Driver's side front fender for $100 30 minutes from me. It's basically the same price as the one in NY because of gas / tolls / 100 miles round trip + commuter traffic.

Also, my windshield wiper fluid reservoir is gone and I don't even hear the pump running when I try to spray the windshield. Has anyone ever had the unfortunate experience of replacing one of these? My rear wiper also does not work :(
 
1 - 20 of 33 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top