Toyota Nation Forum banner

1 - 14 of 14 Posts

·
No2_Corolla
2001 Corolla
Joined
·
64 Posts
Discussion Starter #1
I'm currently rebuilding my 1zz motor and started to wonder how hard would it be to drop in a 2zz.

Has anyone on here ever done it? Is it something that requires a lot of fabrication?
 

·
The Return of the Red Coupe
2010 RAV4 V6
Joined
·
19,665 Posts
Not hard.. it's been done a few times already as far as I know. :)
 

·
good lookin rolla
1998 Corolla 5 spd
Joined
·
44 Posts
i wanted to do this and i figured it would be a pretty common swap, but seeing the work involved i think i'm just gonna go with a s/c for my 1zz
 

·
No2_Corolla
2001 Corolla
Joined
·
64 Posts
Discussion Starter #8
I've gone to phoenixtuning.com and saw the 2zz swap, but I just wanted to hear from someone on the forum who had done it. See if it was worth it or if it would be better to just get a T/C.
 

·
Vivir el momento
Corolla
Joined
·
18,784 Posts
I've gone to phoenixtuning.com and saw the 2zz swap, but I just wanted to hear from someone on the forum who had done it. See if it was worth it or if it would be better to just get a T/C.
Get a tC if you feel it's the right car for you. The 2AZ is quite torquey. Or even cross shop the new 10th gen XRS Corolla.

There is alot of talk on TN about engine swaps and not enough action.
 

·
Registered
99 Corolla
Joined
·
273 Posts
T/C = Turbocharger

the 2zz swap seems to be a wee bit involved, its not exaclty bolt in at all

i may be tackling this but i dont know yet, i have to go check out the donor car tomorow
 
1 - 14 of 14 Posts
Top