Toyota Nation Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
1,658 Posts
Discussion Starter · #1 · (Edited)
3SGTE / 5SFE/ Supra ECU Wiring Patch Harness

Hey guys,

AutoSport Wiring has agreed to make a set of wiring harness extensions for the 5S-FE / 3sgte / 7mgte ECU. With this cable, you can do all sorts of modifications without touching your stock harness. This cable plugs in between the main wiring harness and the ECU itself. SO with this harnes you can wire in all your a/f, ignition, timing and any other controls and guages witout having to touch your stock wiring. Another benefit of this item is that you can make the connections outside of the car and solder everything up nice and clean.

If we can get 10 buyers together, they agreed to sell the harnesses to us for $125USD.

For more info on these, go to:
http://www.autosportwiring.com/pages/1/index.htm

The vendor said if the units are sent to individual locations, it will be $5USD each. If we had them all shipped to one location, shipping would be free. If everyone lives near the northeast (near me), then that makes sense...otherwise individual shipments are more logical.


HERE is the link for the GB. We are tryign to do this for Oct 30th. Please posts with questions or if ur interested.
 

·
Registered
Joined
·
1,658 Posts
Discussion Starter · #4 ·
Anyone interested? We're going to wrap this up in the next week or two
 

·
Registered
Joined
·
18 Posts
harness

it is the exact same harness and connectors for the 3sgte, 5sfe and the supra one? the ecu connections are the same? what about for a jdm celica? would it work?
 

·
92 MR2 Turbo
92 mr2 Turbo
Joined
·
162 Posts
Lol!!
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top