Toyota Nation Forum banner
1 - 2 of 2 Posts

·
Audi Technician
91 MR2
Joined
·
774 Posts
good luck on that kid.

first thing you should have done when the engine was out the car was strip it down and check it out for thermal damage.

cause if the head gasket "ruined the engine" wtf did you put it in w/o rebuilding that bish.

to me your not giving enough info.

for the alt to be spinning belts and locking up the pulley the drive pully must have something wrong w/ it.

to me you didn't look over the motor well enough before the installation
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top