[rrusch24]

I have an 89 Camry 2.0 I-4, i am changing a fuel injector and the oem part number is 23209-74060, will there be a problem if i change it with a 23250-74060?

Thanks

 

[es250nut]

I don't know which injector is which for the part # but this thread I posted earlier might help.

http://www.toyotanation.com/forum/t48812.html

 

[rrusch24]

yes i did read your prior posts, and they helped some. Also i found out that the 23209-74060 was used from 88 to 91 on almost all smaller toyotas(celica,camry,...) and a few lexus' used the 23209. The plugs on the 23250 look the same as the 23209, just lookin for someone to say that they interchange with no problems

 

[white90dx]

If the plugs are the same, the resistances are the same (if you have access to them and can check with a multimeter) and the flow rate is within a few percent (check this link http://www.geocities.com/MotorCity/Pit/9975/dataBySubject/Injectors.html ) then they would be fine - there are no other issues with fitting injectors.

-Charlie

 

[rrusch24]

thanks for all the help this was the first place i looked for info, and man did it help, thanks white90dx, and es250nut