Toyota Nation Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
154 Posts
Pretty much a bolt on affair other than the holes you have to drill in the firewall for the clutch master cylinder. I don't know about the 93 and newer but on the 88-92 all the holes are there you just need to cut them out. Don't waist any time on an auto 3spd, do yourself a favor and swap that POS out.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top