[meteoraman2514]

so my buddy and i had our 2006 taco's with a 3" rough country lift on 285/70's aligned at a ford dealership in town, theyve always done a good job but not this time. they assed up our taco's. they pull real bad. i got called out to work so i havent taken mine back but he took his back to the same place but nothing helps. so he went to the toyota dealership and they told him that toyota's basically gotta have a special alignment and charged him 278 bucks to do a special alignment! i think that is outrageous for just an alignment. has anyone else had this problem? or are we just the lucky ones?

 

[ohioyotaguy]

I've got a 3" Tuff Country lift on my 06 taco and I took mine to our local small-time alignment shop and he got it dead on for $53.50 out the door.

 

[toku58]

so my buddy and i had our 2006 taco's with a 3" rough country lift on 285/70's aligned at a ford dealership in town, theyve always done a good job but not this time. they assed up our taco's. they pull real bad. i got called out to work so i havent taken mine back but he took his back to the same place but nothing helps. so he went to the toyota dealership and they told him that toyota's basically gotta have a special alignment and charged him 278 bucks to do a special alignment! i think that is outrageous for just an alignment. has anyone else had this problem? or are we just the lucky ones?

I sure hope you don't believe them? Take your truck to Sears, the young kids there can do it. It's not rocket science. Doesn't sound like the shop know what they are doing?

Oh? And if you don't have UCA? You might want to look into a set.:thumbsup:

 

[meteoraman2514]

yeah i really didnt think those guys at toyota knew what they were talking about. im gonna let the guys try it again for free, if they dont fix it i might try the local sears. i havent checked into a set of uca's. do they really help out that much??

 

[TRDparts4u]

Do you have the print out with the numbers from the alignment? If the caster number is high, 5-6 degrees, you want to get it at least into the 2's. The Light Racing UCA's can be adjusted plus-minus 5 degrees, these should allow you to get the caster at least close to the factory spec.

http://trdparts4u.com/PD-LR25470.aspx?MakeID=1

Gerone