Toyota Nation Forum banner

Anybody running Nitto TerraGrappler 295/70/17, I was wondering if I can fit them.....

2099 Views 13 Replies 6 Participants Last post by  OneMnk
I was wondering if you can fit these with 2 1/2 inches of lift and minor fender trimming.
1 - 14 of 14 Posts
I am actually running with 18' x 8.5 MKW Rims with 285/ 60R18 Nitto Terra Grapplers. Had to take off the front mud flaps due to rubbing when your in a turn and going up a curb but other than that they are awesome. I believe this is as big as you can go with out a lift.

You can see the pics of my truck at http://www.pikul.com/mytruck/

The tire ride is awesome.

rickinAZ said:
I am actually running with 18' x 8.5 MKW Rims with 285/ 60R18 Nitto Terra Grapplers. Had to take off the front mud flaps due to rubbing when your in a turn and going up a curb but other than that they are awesome. I believe this is as big as you can go with out a lift.

You can see the pics of my truck at http://www.pikul.com/mytruck/

The tire ride is awesome.
rickin,
I am looking at that same tire. How do you like them? How are they on the highway? Loud? Your truck looks awesome with that combo. I was going to do 20's but after seeing yours and one other today with 18's I am sold. Wheels are ordered just need tires to go with them. Did you remount your pressure sensors?
Rickin,

Your tires are only 31.38 inches in diameter, there are a lot of people running tires that are 33.1 and still not having any issues. The width on your tires is wider than most though, because most 285/75/16's are approx. 33.1x11.8. So you are wider but shorter.
The ride is great. The tire size is as big as you can go with a lift from what I am told. I dont know to much about width or size or anything like that. I do know the ride is better than the stock 16's I had. The Nitto's are nice tire all around.

Good luck send me some pictures once your done with your change out.

Rick
I had the tire pressure sensors remounted in the new wheels.
ill post pics when done for sure.
rickinAZ said:
I am actually running with 18' x 8.5 MKW Rims with 285/ 60R18 Nitto Terra Grapplers. Had to take off the front mud flaps due to rubbing when your in a turn and going up a curb but other than that they are awesome. I believe this is as big as you can go with out a lift.

You can see the pics of my truck at http://www.pikul.com/mytruck/

The tire ride is awesome.
Not my cup of tea... but, it looks good. :thumbup:
actually 285/75/16 are more closer to the 32.4 area in hieght
Not according to nitto or BFG's web site.
according to my ruler about 2 months ago, when i had my old truck...i meassured mine
Don't forget rim width effects tire height.
will 295/70/17s Terra Grapplers fit on w/ 3" of lift with minor rubbing?

O and will 33x12.50x17 fit also?

And how are they compared to BFG ATs performance wise. Looks I think they both look badass.
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top