Arm Rests

1559 Views 12 Replies 7 Participants Last post by asgard 1976, Apr 4, 2009

Scott B.

Discussion Starter · Apr 4, 2009

Does anyone know if the arm rest can be purchased as a replacement part from the dealer? I noticed my drivers side arm rest was feeling a bit wierd, and after looking at it closer it appears to be cracked in two places. I was thinking of taking the door panel off and laying some epoxy along the crack lines, but if this doesn't work I may have to repalce the arm rest.

Thanks

Save

1 - 13 of 13 Posts

johnecon2001

· #2 · Apr 4, 2009

Same problem here man. I've got some thin plastic I'm going to mold to it and "weld" in place with some plastic bonding agent.
The dealer wanted to sell the whole door skin.. and that was $$$

Save

asgard 1976

· #3 · Apr 4, 2009 (Edited)

I have the same problem, I took the panel off to take a look and there is a 'T' shaped plastic seam there (under the arm rest), mine broke along the seam. I've been trying to figure out the best way to repair it because I checked out a few dealers and they don't sell the armrest you have to buy the complete panel.

Save

tacojoe

· #4 · Apr 4, 2009

haha me too!!I hope we find a cheap solution for this.

Save

asgard 1976

· #5 · Apr 4, 2009

tacojoe said:
haha me too!!I hope we find a cheap solution for this.

X2
The panel costs $400

Save

Scott B.

Discussion Starter · #6 · Apr 4, 2009

Well after taking the door panel off, I noticed the previous owner attempted to repair the problem by laying down some sort of plastic pieces over the cracks, but these pieces are now pulling away and allowing the arm rest to cave in along the seams which are cracked. I don't think buying a new door panel is really an option at this point and trying to find one of these vehicles in the wrecking yards is next to impossible.....you just never know when buying a used vehicle what to expect

Save

Marc M

· #7 · Apr 4, 2009

I would guess they are available individually. The leather kit I bought came with those panels already upholstered in leather. They just need to be attached.

Marc M

Save

Scott B.

Discussion Starter · #8 · Apr 4, 2009

Marc,

Were you talking about the entire door panel, or just the arm rest?

Thanks

Save

Marc M

· #9 · Apr 4, 2009

Scott B. said:
Marc,

Were you talking about the entire door panel, or just the arm rest?

Thanks

Just the cloth portion.

Marc M

Save

Scott B.

Discussion Starter · #10 · Apr 4, 2009

Thanks Marc,

Could you tell me more about where you purchased the upholstered arm rests? Maybe I should consider re-doing both arm rests since I need to replace or repair one already.

Save

toku58

· #11 · Apr 4, 2009

TRY THIS:
http://www.toyotanation.com/forum/showthread.php?t=232581

Better than the cloth.:thumbsup:

Save

asphalt victory

· #12 · Apr 4, 2009

me and my buddie fixed his crown vic

we drilled holes on either side of the crack and kindov sewed it togeather with some ss whire and gorilla glue it worked well

Save

asgard 1976

· #13 · Apr 4, 2009

Scott B. said:
Well after taking the door panel off, I noticed the previous owner attempted to repair the problem by laying down some sort of plastic pieces over the cracks, but these pieces are now pulling away and allowing the arm rest to cave in along the seams which are cracked. I don't think buying a new door panel is really an option at this point and trying to find one of these vehicles in the wrecking yards is next to impossible.....you just never know when buying a used vehicle what to expect

Hey, I bought my truck brand new and about a year after I had the broken arm rest problem. I didn't abuse the interior or had any kind of accident, the arm rest plastic is just weak.

Save

1 - 13 of 13 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month