[ItsPhilD]

I would like to know how to remove the lid for this box. Seems the original owner had a habit of putting his change on the top. Then when he would open it the change would slide down behind the lid. I HATE rattles and, well, the change rattles enough to annoy me. Would appreciate any help in how to safely remove the lid.



2013 SE V6

 

[sethr]

I would like to know how to remove the lid for this box. Seems the original owner had a habit of putting his change on the top. Then when he would open it the change would slide down behind the lid. I HATE rattles and, well, the change rattles enough to annoy me. Would appreciate any help in how to safely remove the lid.



2013 SE V6

Take the silver cupholder/tranny lever section off. It's all open under there and you can get your arm in.

Sent from my STH100-1 using Tapatalk

 

[CamRod1]

Shooting from the hip as 2015's don't have a lid. But if you lift out the whole LRU and put it on the bench, you may shake out enough change for a 7-Eleven Slurpie?

 

[molson.david]

You can either remove the whole center tunnel/ center storage bezel (that draw is attached to the bezel with a few screws) and flip it upside down or use a vacuum cleaner or use some sticky packing tape and small long screwdriver to direct a pc. of tape.